Traction Pulling stumps with a 2720?

   / Pulling stumps with a 2720?
  • Thread Starter
#31  
Well, I was able to pull half of the stumps with the chain (the small ones). The big ones I couldn't remove, the tractor's wheels would just spin (I have R3 tires so it doesn't help). I'll get a tooth bar for these.

There didnt' seem to be a risk of the tractor flipping over.
If I remember my physics lessons well, as long as the force is below the center of gravity it will actually pull the tractor down to the ground so it's even safer. If it's above the center of gravity is when there's a chance of flipping?

Thanks all for the recommendations.
 
Last edited:

Tractor & Equipment Auctions

2020 Caterpillar 302.7D Mini Excavator (A51242)
2020 Caterpillar...
PORTER CABLE 150 PSI AIR COMPRESSOR (A50854)
PORTER CABLE 150...
2015 CAT 573c Fellerbuncher Cutter (A48836)
2015 CAT 573c...
3in Poly Pipe (A49461)
3in Poly Pipe (A49461)
2007 Case IH 2588 4WD Combine (A50657)
2007 Case IH 2588...
2010 CAT 140M MOTORGRADER (A50854)
2010 CAT 140M...
 
Top