Push/pull switch wiring help

[Stepadery]

I have a 2021 DR Field and Brush Mower Pro Max52T. I pulled the wires off of the push/pull TPDT switch. The wire colors are red, orange and 2 whites. The switch itself has 8 pins, 2 rolls of 3 and 1 roll of 2. I need assistance on what wires go to which pins on the switch.

Thanks

​

 

[nyone]

Is the switch lighted? The diagram should typicaly be on the switch but what the wires need to do should be in a diagram that DR has.

Typicaly the power and ground would be the center terminals and the outer ones would be the switched terminals. I believe the switch is lighted so theres an extra pair of terminals for that.

 

[Stepadery]

A representative (Brian) from DR assisted me with this. He was a great communicator and stuck with me on this until it was resolved. Thanks all for your suggestions.

 

[airbiscuit]

So, what was the solution?

 

[Stepadery]

So, what was the solution?

 

[airbiscuit]

Thanks for the update.