QA bail spear

Slippy · Oct 25, 2009

Anyone know who sells a QA bail spear, high back? Been looking for one and found a couple, but they want over $500, which I think is too high.
Any suggestions on who to contact?

Kfbeal · Oct 26, 2009

I built one for about $200 + or - some. The spear with bushing was around $90 and the frame work about $100 then the smaller spears. What type of QA? Mine was for a JD 500 series loader.

blueriver · Oct 26, 2009

yep I agree...build your own. Look on ebay, I saw the other day 2 bale spears and bushings Cheap. You can buy the QA plate as well and have less $$ tied up.

Kfbeal · Oct 26, 2009

Here's some pics. Not the most professional I suppose, but gets the job done for sure. I made it where I can remove all spears. Frame is 3x3 3/16" square tubing. Center is 3x5 "1/4 square tubing. Angle is 1/4" or 5/16".

Slippy · Oct 27, 2009

Building sounds like a good idea, but I don't weld.
It is for a skid steer compatable QA. I see in another post that Kingcutter may make one. My local tsc store says they can't get it.