QA bail spear

/ QA bail spear #1  

Slippy

Veteran Member
Joined
Sep 23, 2002
Messages
1,059
Location
Ohio
Tractor
Mahindra 6000 4wd; IH x2; NHTC40DSS; International 1086; JD 5115M
Anyone know who sells a QA bail spear, high back? Been looking for one and found a couple, but they want over $500, which I think is too high.
Any suggestions on who to contact?
 
/ QA bail spear #2  
I built one for about $200 + or - some. The spear with bushing was around $90 and the frame work about $100 then the smaller spears. What type of QA? Mine was for a JD 500 series loader.
 
/ QA bail spear #3  
yep I agree...build your own. Look on ebay, I saw the other day 2 bale spears and bushings Cheap. You can buy the QA plate as well and have less $$ tied up.
 
/ QA bail spear #4  
Here's some pics. Not the most professional I suppose, but gets the job done for sure. I made it where I can remove all spears. Frame is 3x3 3/16" square tubing. Center is 3x5 "1/4 square tubing. Angle is 1/4" or 5/16".
 

Attachments

  • 100_4067 (Medium).JPG
    100_4067 (Medium).JPG
    128.3 KB · Views: 243
  • 100_4069 (Medium).JPG
    100_4069 (Medium).JPG
    104 KB · Views: 175
/ QA bail spear
  • Thread Starter
#5  
Building sounds like a good idea, but I don't weld.
It is for a skid steer compatable QA. I see in another post that Kingcutter may make one. My local tsc store says they can't get it.
 
 

Marketplace Items

1998 Mack DM690SX Chassis Truck  (A62679)
1998 Mack DM690SX...
2022 EZ-GO ELITE ELECTRIC GOLF CART (A63276)
2022 EZ-GO ELITE...
2023 Hustler X-One Zero Turn (A63116)
2023 Hustler X-One...
22" PIN-ON EXCAVATOR BUCKET W/PINS (A60429)
22" PIN-ON...
2010 Massey Ferguson 2625 (A60462)
2010 Massey...
2013 HINO CONV. ICE CREAM TRUCK (A63569)
2013 HINO CONV...
 
Top