Quick Attachment system

[1kubota]

Hi everyone,

I have received my quick attach system and I didn't receive any directions on how to install them. I received 6 big washers that have a fold in them (when I get home today I will post pictures) Can someone please explain what the washers are for thanks.

 

[1kubota]

Well I called titain and asked what washers were for, thay asked me what washers it wasn't supposed to have any washers with them.

 

[TomSeller]

Interesting. Please post some pictures. Thank you.

 

[AaronS]

The washers with the fold are for the pins on your attachments. You put them on the lift pin, then attach the snap pin through the hole in the fold of the washer (they should have a hole anyway), and this helps with stability of the qa.

 

[Guesseral]

The washers with the fold are for the pins on your attachments. You put them on the lift pin, then attach the snap pin through the hole in the fold of the washer (they should have a hole anyway), and this helps with stability of the qa.

I didn't think Titan sold 3 pth quick adaptors only quick hitch for loaders?

 

[chopped]

Here is how they go on the bend and the clip hold them at the outer ends so the 'fingers' of the hitch can grab in between

Harbor Freight Quick Hitch Item# 97214 (part III quick hitching to attachment or implement) - YouTube

Harbor Freight Quick Hitch Item# 97214 (part I unboxing) - YouTube

Quick Hitch Modification - YouTube

 

[davrow]

Excellent picture, chopped. Very clear how it is used.

 

[chopped]

If you ned more other than buying them there is a thread here somewhere on how to make them. basically large washer bent and then drill a hole for the clip to pass through. Not sure if its much of a savings from just buying them.

 

[k0ua]

If you ned more other than buying them there is a thread here somewhere on how to make them. basically large washer bent and then drill a hole for the clip to pass through. Not sure if its much of a savings from just buying them.

Yes, but it is more fun to make them and you have a feeling of accomplishment! I have made several

 

[1kubota]

That would work out when I finish up with my backhoe I'll have to try it thanks for the info.