Quick Attachment system

   / Quick Attachment system #1  

1kubota

New member
Joined
Jan 31, 2014
Messages
8
Location
powell, tn
Tractor
kubota b7200
Hi everyone,

I have received my quick attach system and I didn't receive any directions on how to install them. I received 6 big washers that have a fold in them (when I get home today I will post pictures) Can someone please explain what the washers are for thanks.
 
   / Quick Attachment system
  • Thread Starter
#2  
Well I called titain and asked what washers were for, thay asked me what washers it wasn't supposed to have any washers with them.
 
   / Quick Attachment system #3  
Interesting. Please post some pictures. Thank you.
 
   / Quick Attachment system #4  
The washers with the fold are for the pins on your attachments. You put them on the lift pin, then attach the snap pin through the hole in the fold of the washer (they should have a hole anyway), and this helps with stability of the qa.
 
   / Quick Attachment system #5  
The washers with the fold are for the pins on your attachments. You put them on the lift pin, then attach the snap pin through the hole in the fold of the washer (they should have a hole anyway), and this helps with stability of the qa.

I didn't think Titan sold 3 pth quick adaptors only quick hitch for loaders?
 
   / Quick Attachment system #7  
Excellent picture, chopped. Very clear how it is used.
 
   / Quick Attachment system #8  
If you ned more other than buying them there is a thread here somewhere on how to make them. basically large washer bent and then drill a hole for the clip to pass through. Not sure if its much of a savings from just buying them.
 
   / Quick Attachment system #9  
If you ned more other than buying them there is a thread here somewhere on how to make them. basically large washer bent and then drill a hole for the clip to pass through. Not sure if its much of a savings from just buying them.

Yes, but it is more fun to make them and you have a feeling of accomplishment! I have made several
 
   / Quick Attachment system
  • Thread Starter
#10  
That would work out when I finish up with my backhoe I'll have to try it thanks for the info.
 
 

Tractor & Equipment Auctions

NANCE UNDERGROUND CONDUIT BOX (A50854)
NANCE UNDERGROUND...
2006 X-L SPECIALIZED 40TON RGN (A50854)
2006 X-L...
RIGID 150 PSI AIR COMPRESSOR (A50854)
RIGID 150 PSI AIR...
2020 New Holland 105 Workmaster MFWD Compact Tractor with 632TL Front Loader - Poultry Special (A51039)
2020 New Holland...
2018 FORD EXPEDITION (A51406)
2018 FORD...
PICKUP TIRE CHAINS (A50854)
PICKUP TIRE CHAINS...
 
Top