bboston
New member
I need to know how to replace broken lug bolts in rear hub on Ford 650.
Rear wheel lug bolts
- Thread starter bboston
- Start date
- Views: 2076
Western
Super Member
Only ones I've dealt with where pressed in, I was able to get most out , but ended up taking the hub to a mechanic shop that was able to use a press to remove the bent one. They also pressed the new ones in for me.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
do you have the hub off the tractor onthe bench, or will you be doing it on tractor?
and do you have a hole saw?
and do you have a hole saw?
Stimw
Elite Member
There are a lot of different styles of hubs, a pic would make it easier to tell what you have.
NAPA is a good source, most stores can have the studs in a short time if not in stock.
NAPA is a good source, most stores can have the studs in a short time if not in stock.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
650 only has 1 style of hub...
Mace Canute
Elite Member
Welcome to TBN.
Western
Super Member
I'm thinking this was a "drive-by" post:laughing:
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
i hope not...
Similar threads
