Chipper Recommended Chipper Suggestions

   / Recommended Chipper Suggestions #21  
Along with good knives make sure the anvil is good and sharp as well. Basically it is a rotating pair of scissors in there. The knives spinning around and shearing off the wood against the anvil. I was at a Hazardous tree falling class this last weekend. They had a Chipper mechanic there. His recommendation for the softer wood we have around here is as small a gap as possible between the knive and anvil. On the other coast where there are harder woods go with a larger gap up to 1/4". Although that would be for big machines. His other big point to make was grease grease grease on all of the fittings. Just thought that I would pass that along.
 
   / Recommended Chipper Suggestions #22  
Here is my Morbark 2060 cyclone chipper. I like not having to tie up a tractor for chipping. I can also easily transport this unit.


DSC00852.jpg
 
 

Tractor & Equipment Auctions

MCELROY 500 SERIES 3 TRACSTAR FUSION MACHINE (A53843)
MCELROY 500 SERIES...
DeeZee Crossover Aluminum Truck Tool Box - Secure Weather-Resistant Storage for Pickup Beds (A53473)
DeeZee Crossover...
2021 Liebherr L556 (A53472)
2021 Liebherr L556...
2014 Jacobsen AR3 Commercial Mower (A53421)
2014 Jacobsen AR3...
2008 Ford F-550 Reading Enclosed Service Truck (A52377)
2008 Ford F-550...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top