bdhsfz6
Elite Member
- Joined
- Apr 11, 2015
- Messages
- 3,097
- Location
- Northeastern Pennsylvania
- Tractor
- Kubota MX5800 HST & L6060 HSTC Formerly L6060 HST B7100 HST, L2550, L3010 HST, L3430 HST
Two minutes with an angle grinder on this tool from HF:
www.harborfreight.com
Works great to release connected pressure bound QA's. It also helps separate or connect "sticky" QA's, even if they aren't pressure bound, by holding open the female QA while the male is inserted. Particularly useful in cold weather or with slippery connectors in hard to reach places.
For implements with two male QA's, I connect them together using a female to female adapter tee with a relief valve as mentioned above.
9 in. Locking Welding Clamp
Amazing deals on this Locking Welding Clamp at Harbor Freight. Quality tools & low prices.
www.harborfreight.com
Works great to release connected pressure bound QA's. It also helps separate or connect "sticky" QA's, even if they aren't pressure bound, by holding open the female QA while the male is inserted. Particularly useful in cold weather or with slippery connectors in hard to reach places.
For implements with two male QA's, I connect them together using a female to female adapter tee with a relief valve as mentioned above.
Last edited: