Removing high tensile fence wire to re-use?

   / Removing high tensile fence wire to re-use? #11  
Here are some pics. I dug the thing out this morning. I used hairpins instead of 1/4" bolts as I had described earlier, getting old is tough - memory not as sharp as it used to be. The uprights are screwed to the plywood with 3" deck screws from underneath. The 4 holes in the plywood are for using tent stakes to hold it to the ground or you could screw it down to something else. A good, simple tool from scraps I had lying around.
 

Attachments

  • DSCN2735.JPG
    DSCN2735.JPG
    1.8 MB · Views: 111
  • DSCN2732.JPG
    DSCN2732.JPG
    1.5 MB · Views: 94
  • DSCN2731.JPG
    DSCN2731.JPG
    1.7 MB · Views: 95
  • DSCN2733.JPG
    DSCN2733.JPG
    1.5 MB · Views: 94
  • DSCN2734.JPG
    DSCN2734.JPG
    1.7 MB · Views: 91
   / Removing high tensile fence wire to re-use? #12  
Here are some pics. I dug the thing out this morning. I used hairpins instead of 1/4" bolts as I had described earlier, getting old is tough - memory not as sharp as it used to be. The uprights are screwed to the plywood with 3" deck screws from underneath. The 4 holes in the plywood are for using tent stakes to hold it to the ground or you could screw it down to something else. A good, simple tool from scraps I had lying around.
I think you could wind a softer wire like smooth twisted or barbed wire that tight, but it wouldn’t work for high tensile wire. Something the makes a large loop wind like a spinning Jenny is what is needed for high tensile wire.
 
   / Removing high tensile fence wire to re-use? #13  
That IS a spool of hi tensile steel wire, not aluminum wire.
 
   / Removing high tensile fence wire to re-use? #14  
That IS a spool of hi tensile steel wire, not aluminum wire.
Then I think it’s overwound. How does it spool out again after being wound so tight? All of that wire comes in large diameter coils to avoid kinking.
 
   / Removing high tensile fence wire to re-use? #15  
This Spinning Jenny is what I use. Works best with my wife helping to keep a little back tension as I wind it up. Tye wrap the bundle and store it for reuse.

Added this as it is what makes rewinding the wire easy. And goes along with the previous post I made.

 

Tractor & Equipment Auctions

2007 JLG E400AJP TELESCOPIC/SCISSORING MANLIFT (A52709)
2007 JLG E400AJP...
2011 FREIGHTLINER CASCADIA TANDEM AXLE DAY CAB (A59575)
2011 FREIGHTLINER...
TOOTHED BUCKET ATTACHMENT FOR MINI EXCAVATOR (A58214)
TOOTHED BUCKET...
500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
2014 PETERBILT 384 TANDEM AXLE CDL REQUIRED WRECKER (A59575)
2014 PETERBILT 384...
2003 Komatsu WA250-3MC Articulated Wheel Loader (A56857)
2003 Komatsu...
 
Top