Replacement Aerator Tines

[Spiderman]

I'm looking for a source for replacement tines for a 10+ year old Pacer aerator. My dealer says he can get them for $11 each but that seems pricey to me especially when there are 120 tines on the machine (although not all 120 need to be replaced). Do any of you know of another source for replacement aerator tines? Thnaks for your help.

 

[BRBurns]

That price isn't terrible. You should see what bush hog wants for theirs. Everything attachments has some that are petter priced. I don't kon if they will fit yours, but they fit my bush hog.

 

[94BULLITT]

Everything Attachments has them. Check yours to see if they are the same size.

http://www.everythingattachments.com/Non-powder-coated-plugger-spoons-p/pl-spoons.htm

 

[Spiderman]

Thanks for your replies. The "Everything Attachment" tines won't work. The tines I need are 3/4" that straddle mount a 1/4" wheel and are anchored by 2 bolts 1 1/2" apart. I've tried contacting the manufacturer with no luck so far.

 

[94BULLITT]

I googled "2 bolt areator spoon" and found that some Gandy aerators used them.

http://www.gandy.net/documents/4948ST.pdf

 

[Spiderman]

For those of you that may have a similar need R & R Products, Inc has these tines. Part #R301411

 

[94BULLITT]

For those of you that may have a similar need R & R Products, Inc has these tines. Part #R301411

Try googling that number.

 

[HayDR]

We have the Aerator tine. Our Boron Steel two hole tine is $4.25 freight included if you purchase $100 or more.

 

[Spiderman]

We have the Aerator tine. Our Boron Steel two hole tine is $4.25 freight included if you purchase $100 or more.

HayDR,
As noted in a previous post the tine that I need has a 1/4" slot to fit over a 1/4" wheel and the bolts are 1 1/2" apart. Unless I am mistaken, the diagram that you attached does not show either of these. Thanks for trying. Please post if you do have the correct tine