Replacement post hole auger

   / Replacement post hole auger #1  

saltbranch

Silver Member
Joined
Sep 29, 2009
Messages
219
Looking to buy a 16" x 48" post hole auger, has the 2" connection. Will be used in a very hard clay soil..no rocks. Any suggestions on brands to look at?
 
   / Replacement post hole auger #2  
saltbranch said:
Looking to buy a 16" x 48" post hole auger, has the 2" connection. Will be used in a very hard clay soil..no rocks. Any suggestions on brands to look at?

PTO powered 3 point mount or Hydraulic powered FEL mount? I have a Danuser hydraulic 1025H on order. They have PTO driven ones as well.
 
   / Replacement post hole auger
  • Thread Starter
#3  
PTO 3 point, sorry forgot to add that
 
   / Replacement post hole auger #5  
2" round shank? A 16" auger in tough conditions is asking a lot of that drive connection. What brand of PHD is it?
 
   / Replacement post hole auger
  • Thread Starter
#6  
2" round shank? A 16" auger in tough conditions is asking a lot of that drive connection. What brand of PHD is it?

Dont know, its old and has no markings. Worst case it breaks and then I will buy complete new.
 
   / Replacement post hole auger #7  
Dont know, its old and has no markings. Worst case it breaks and then I will buy complete new.

I don't think you will break the auger, but the shear pin on the gearbox input shaft where the PTO attaches is gonna take a beating. I think the shearpin in mine is 3/8". It's nowhere nearly as big as the one on my rotary cutter. I would sure not go above a grade 5 bolt for a shearpin. It's easier to sell a working PHD and buy a new one than sell one with a busted gearbox for scrap.
 
   / Replacement post hole auger #8  
You'll find a selection of different augers for PTO post hole diggers on our website. The Danuser augers with cast heads are a little pricy but probably some of the most durable augers for 2" round applications on the market.
 
   / Replacement post hole auger #9  
Check out your local farm store/TSC/rural king. I know both TSC and rural king in my area carry them. (that is if you dont want to pay shipping)
 
   / Replacement post hole auger #10  
Check with a TBN advertiser Everything Attachments.
girl.jpg

beaty.jpg
 
   / Replacement post hole auger
  • Thread Starter
#11  
Thanks for the help everyone. I am over the 1000 mile range for free shipping for EA, thats my main reason for not really trying to buy from them. I think I am going to go 12" inch auger and the few I need to go big on I will pay a neighbor to drill out with his 16" auger or dig it out by hand after punching the 12" hole.
 
   / Replacement post hole auger #12  
What size tractor are you going to use with the PHD??
 
 

Tractor & Equipment Auctions

2004 DCT PUMP TRAILER (A58216)
2004 DCT PUMP...
Unused 2025 CFG Industrial H15R Mini Excavator (A59228)
Unused 2025 CFG...
UNUSED FUTURE FT-RP72 - 72" HYD ROCK CRUSHER (A52706)
UNUSED FUTURE...
500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
2015 CATERPILLAR 259D SKID STEER (A60429)
2015 CATERPILLAR...
2 - WEATHER GUARD TOOLBOXES (A55745)
2 - WEATHER GUARD...
 
Top