REPLACING ORIGINAL DISKS

/ REPLACING ORIGINAL DISKS #1  

spo307

Gold Member
Joined
Oct 2, 2007
Messages
446
Location
Levittown & Long Eddy NY
Tractor
kubota L4400
The disks range from 17 1/4 to 15 1/8, there is 28 of them. if I was to replace them with heavier 4.5mm 16" disk, beside loosing 2 inches of depth does anyone see something I am missing. I disked the plots 2 times this past season, and see no need to go deeper than 4 to 5". looking for your thoughts, thanks
 
/ REPLACING ORIGINAL DISKS #2  
Even if your disks started out as 18" I think you'll only lose 1" of depth if you go with 16". The diameter/radius thing. :)
It may well be that the added weight of the thicker disks will make up for it, anyway.
Good luck, Wm
 
/ REPLACING ORIGINAL DISKS #3  
Like willflick said you will only loose one inch. as long as you change out all of them you will be fine.
 
 
 
Top