REPLACING ORIGINAL DISKS

/ REPLACING ORIGINAL DISKS #1  

spo307

Gold Member
Joined
Oct 2, 2007
Messages
446
Location
Levittown & Long Eddy NY
Tractor
kubota L4400
The disks range from 17 1/4 to 15 1/8, there is 28 of them. if I was to replace them with heavier 4.5mm 16" disk, beside loosing 2 inches of depth does anyone see something I am missing. I disked the plots 2 times this past season, and see no need to go deeper than 4 to 5". looking for your thoughts, thanks
 
/ REPLACING ORIGINAL DISKS #2  
Even if your disks started out as 18" I think you'll only lose 1" of depth if you go with 16". The diameter/radius thing. :)
It may well be that the added weight of the thicker disks will make up for it, anyway.
Good luck, Wm
 
/ REPLACING ORIGINAL DISKS #3  
Like willflick said you will only loose one inch. as long as you change out all of them you will be fine.
 
 

Marketplace Items

2019 Toro Groundsmaster 7200 72in. Zero Turn Commercial Mower (A61572)
2019 Toro...
John Deere 400 (A64119)
John Deere 400...
EZ Trail 3400 (A63688)
EZ Trail 3400 (A63688)
2016 Eager Beaver 20XPT 27ft 25 Ton T/A Flatbed Equipment Trailer (A61572)
2016 Eager Beaver...
2006 Cadillac Superior 6-Door Limousine, Ultra-Low 20396 Miles (A63689)
2006 Cadillac...
2022 FREIGHTLINER CASCADIA 126 6X4 T/A SLEEPER TRUCK TRACTOR (A59911)
2022 FREIGHTLINER...
 
Top