REPLACING ORIGINAL DISKS

/ REPLACING ORIGINAL DISKS #1  

spo307

Gold Member
Joined
Oct 2, 2007
Messages
446
Location
Levittown & Long Eddy NY
Tractor
kubota L4400
The disks range from 17 1/4 to 15 1/8, there is 28 of them. if I was to replace them with heavier 4.5mm 16" disk, beside loosing 2 inches of depth does anyone see something I am missing. I disked the plots 2 times this past season, and see no need to go deeper than 4 to 5". looking for your thoughts, thanks
 
/ REPLACING ORIGINAL DISKS #2  
Even if your disks started out as 18" I think you'll only lose 1" of depth if you go with 16". The diameter/radius thing. :)
It may well be that the added weight of the thicker disks will make up for it, anyway.
Good luck, Wm
 
/ REPLACING ORIGINAL DISKS #3  
Like willflick said you will only loose one inch. as long as you change out all of them you will be fine.
 
 

Marketplace Items

case 370 glass door never installed (A61307)
case 370 glass...
2016 Chevrolet Silverado 1500 4x4 Crew Cab Pickup Truck (A61573)
2016 Chevrolet...
(2) FORESTRY TIRES ON RIMS (A64276)
(2) FORESTRY TIRES...
Caterpillar D4D Tractor Service Manuals (A63117)
Caterpillar D4D...
2018 Regal 29OBX 29ft Boat with 34ft T/A Boat Trailer (A61569)
2018 Regal 29OBX...
2016 Chevrolet Silverado 1500 Crew Cab Pickup Truck (A61573)
2016 Chevrolet...
 
Top