Replacing piston rings

[IH_4_Me]

Hey guys,
Is it possible to replace the piston rings in a tractor engine without having to separate it from the gearbox? i.e. having to break the tractor in half to split the engine open. I have rebuilt smaller engines from frame type vehicles where the engine is easily removed and put back in but a tractor is is different story, with the engine being part of the frame itself.

Thanks for your help

 

[JimR]

Yes, if you can remove the cylinder head and oil pan.

 

[DavidJ]

We did it on a Fergie TO-20 without a problem. The biggest concern is getting the oil pan gasket back together correctly and all that takes is a bit of care. It will all depend on your model of tractor and whether the oil pan is part of the frame.

 

[ljh2]

Did it with an old Allis Chalmers WD with no problem. I guess it would depend on your access to the crankshaft.

 

[higgy]

It can be done on most tractors, however, splitting a tractor in half is not hard, and does not take long. Once split the rest is a cake walk.