Rk37

[Farmerjd2020!]

Hello, I am new to the rk tractor .I have a 2023 rk37 and I have this symbol that is on can some one tell me if it is of concern?

 

[tacticalturnip]

Not long ago I saw a thread on this, let me see if I can dig it up; I'm under the impression it's basically a Check Engine Light.

 

[tacticalturnip]

TYM warning light

Posted this on another thread before I realized there was a TYM specific forum. This is on a Cabela's LM55H which, when I bought it in 2016, was equivalent to the T554hst. Responses I have received so far are oil pressure light per page 40 of the T554 manual, but this light does not look like...

www.tractorbynet.com

RK37 Check Engine lamp, How to clear

New member here, I have a 2019 RK37 Shuttle Shift. It has about 155 hrs and up till now, has run great. The other day, the check engine indicator (Crankcase outline with an "!"inside) came on. Shortly after that the symbol for a regen came on.. No biggie, I've always just moved over to a...

www.tractorbynet.com

RK 37 check engine light on at 167 hours

2017 RK 37 wouldn't turn over 3 days ago. Instrument panel showing check engine light. Battery ok. Gave up and next day it started but the start switch doesn't feel right. Have a check engine light and seems to run normally. Haven't done a regeneration since 60 hours and have 167, so tried to...

www.tractorbynet.com

The first one is the thread I was thinking about, but I also found these other two. I hope reading through these can help you out.

 

[Torvy]

This may help.

Available downloads

Explore current and historical documents related to your TYM tractor. Understand how to safely run and operate your machine with manuals, understand the components and parts of your tractor with catalogs, and discover key features with brochures. Use the filters below to narrow down to the TYM...

tym.world

I believe the RK37 is directly a T394.

 

[agjones]

I'd been getting this on my 55 when the batt voltage goes a little low. Still started .

Replaced battery and haven't seen since. The start check voltage check might just be sensitive