Router Table....Unisaw
- Thread starter scott_vt
- Start date
- Views: 8855
Woodzy
New member
Here is a picture of my Unisaw - I added the router table to the right but then built a sliding table to the left. I can cut panels 42" wide. The miter gage can be set to any degree and also some odd ones for making frames. Dowel pins are use to set the angle.
Jeff
Jeff
Cliff_Johns
Elite Member
</font><font color="blue" class="small">( Here is a picture of my Unisaw - I added the router table to the right but then built a sliding table to the left. . . . )</font>
You've got some nice equipment and space to put it there.
The sliding table is worth it's weight, that's for sure. Like many tools, you just don't know what you're missing until you have the right tool for the job and having sliding table makes the table saw a whole new experience.
Cliff
You've got some nice equipment and space to put it there.
The sliding table is worth it's weight, that's for sure. Like many tools, you just don't know what you're missing until you have the right tool for the job and having sliding table makes the table saw a whole new experience.
Cliff
Cliff_Johns
Elite Member
</font><font color="blue" class="small">( Here is a picture of my Unisaw - I added the router table to the right but then built a sliding table to the left. . . . )</font>
You've got some nice equipment and space to put it there.
The sliding table is worth it's weight, that's for sure. Like many tools, you just don't know what you're missing until you have the right tool for the job and having sliding table makes the table saw a whole new experience.
Cliff
You've got some nice equipment and space to put it there.
The sliding table is worth it's weight, that's for sure. Like many tools, you just don't know what you're missing until you have the right tool for the job and having sliding table makes the table saw a whole new experience.
Cliff
OP
scott_vt
Super Member
- Joined
- Oct 5, 2004
- Messages
- 7,828
- Location
- east wells,vt
- Tractor
- 1986 MF 1040, 1942 Farmall A, 1949 Farmall Super A
Mornin Woodzy,
Real nice sliding table setup!!! I am cramped for space and even that setup might take too much of my floor space, but that is the way to go if you can.
Hopefully in the next few years I can get my barn/workshop built and have a little more useable space /forums/images/graemlins/grin.gif
Thanks for the pics!!!
Real nice sliding table setup!!! I am cramped for space and even that setup might take too much of my floor space, but that is the way to go if you can.
Hopefully in the next few years I can get my barn/workshop built and have a little more useable space /forums/images/graemlins/grin.gif
Thanks for the pics!!!
OP
scott_vt
Super Member
- Joined
- Oct 5, 2004
- Messages
- 7,828
- Location
- east wells,vt
- Tractor
- 1986 MF 1040, 1942 Farmall A, 1949 Farmall Super A
Mornin Woodzy,
Real nice sliding table setup!!! I am cramped for space and even that setup might take too much of my floor space, but that is the way to go if you can.
Hopefully in the next few years I can get my barn/workshop built and have a little more useable space /forums/images/graemlins/grin.gif
Thanks for the pics!!!
Real nice sliding table setup!!! I am cramped for space and even that setup might take too much of my floor space, but that is the way to go if you can.
Hopefully in the next few years I can get my barn/workshop built and have a little more useable space /forums/images/graemlins/grin.gif
Thanks for the pics!!!
