RTV500 HST Shifting

   / RTV500 HST Shifting
  • Thread Starter
#41  
737pilot,

I hoped that complaining (constantly, sorry) about this would eventually yield results. Thanks to Matt, Tom and Stonhaller it did.

The adjustments dont turn it into a Polaris, but it is much nicer to drive and much less annoying now. It's actually fun.

After years of building cars, you kinda get a sense that there is more power available, and that is what was driving me up a wall. Now it's been found.

Good luck..I think you'll like the results if you do the adjustments.
 
   / RTV500 HST Shifting #42  
Wow! I come back from vacation and see that we finally have some results. Thanks Matt for helping us all out.

737pilot I posted pictures of the idle screw and throttle stop (max speed) adjustments previously here RTV500 Throttle Adjustments - TractorByNet.com. These screws are buried under the carb so they are a little hard to see.
 
   / RTV500 HST Shifting #43  
Matt,

I have a 500 rtv and I am concerned about the power that it displays in the mud. I want it to go when I press on the gas. It has to build up rpm before it starts to move. Can I correct this? My dealer really does not want to make any adjustments. Let me know.

Mike
(deanj)
 

Tractor & Equipment Auctions

Booster Cables (A55852)
Booster Cables...
JLG 1255 Telehandler (A55315)
JLG 1255...
2019 Ligchine Spiderscreed Concrete Screed (A55851)
2019 Ligchine...
UNUSED WOLVERINE TDB-11-72W 72" BUCKET (A57193)
UNUSED WOLVERINE...
2008 Ford F-450 Crew Cab Service Truck (A55973)
2008 Ford F-450...
(6) 10" CHANNEL IRON (A57192)
(6) 10" CHANNEL...
 
Top