2515R Dude
Platinum Member
Bummer, maybe she has a hot daughter to make it worth for your trouble?
sawzall blade extension? need to cut 6ft down inside of 5" PVC fence post.
Carl_NH
Elite Member
- Joined
- Apr 5, 2002
- Messages
- 3,799
- Location
- Coastal NH
- Tractor
- 01 Kubota B21TLB, 2010 Ferris 52" ZTR, Cub Cadet 1811, Gravely Super8
When we installed PVC fencing on the gate posts it was a aluminum H fit inside the post - and on the large gate posts I used that H along with PT lumber cut to fit inside the PVC and aluminum H to screw hinges into.
Why not mix up some loose concrete and pour inside the post and fill it up so its one solid post? Brace each side to level.
Why not mix up some loose concrete and pour inside the post and fill it up so its one solid post? Brace each side to level.
grsthegreat
Super Star Member
My gate is about 300-400#. Have vinyl fencing.
Used 5x5 x 1/4” tube. I plasma cut the 3 holes and powder coated it white. Looks just like vinyl post.
Made brackets to hold lights also.
Used 5x5 x 1/4” tube. I plasma cut the 3 holes and powder coated it white. Looks just like vinyl post.
Made brackets to hold lights also.
Last edited:
