Scraper pan

[scraperpan05]

Well the bowl is 46'' width and overall is 51''. IT holds "about" 3/4 of yard of dirt. Well I thought about going with out an apron, but it holds more dirt, looks alot better and helps pan out your dirt better. It all depends on the operator I can load it in about 30' just Idling the tractor. I have more than enough HP and traction to pull this pan.

 

[john_bud]

I can tell this ain't your first rodeo!~~

Looks like factory baked enamel finish.

Neat clean hydrolic lines.

Excellent workmanship.

Do you have a full set of pics showing the build?

jb

 

[Renze]

Well the bowl is 46'' width and overall is 51''. IT holds "about" 3/4 of yard of dirt. Well I thought about going with out an apron, but it holds more dirt, looks alot better and helps pan out your dirt better. It all depends on the operator I can load it in about 30' just Idling the tractor. I have more than enough HP and traction to pull this pan.

what is the weight and hp of your tractor ?

 

[Hookblock]

Great build. Looking forward to some action shots.

 

[scraperpan05]

Here are some more build picture? I'm planning on building a different style of scraper plan this spring, I'm in the designning mode right now. The only thing I had to change on this pan was the apron cylinder didn't go up high enough otherwise works great. Moves lots of dirt fast.

 

[Willl]

Nice job. Love the red zerks.

 

[Rowdius]

I've moved alot of dirt with cat 623s and 613s, and I gotta say a full day of running a scraper hard will wear you out, but I really like the way this one looks!

 

[mjncad]

Did you bend your own hydraulic tubing or have it done? If you had it done by a hydraulic shop, may I ask what it cost?

Looks great!

 

[scraperpan05]

Yes I bent all the hydraulic tubing myself, also got all the tubing from my work.

 

[mjncad]

Yes I bent all the hydraulic tubing myself, also got all the tubing from my work.

What kind of tubing bender did you use? I gather brazing the ends on wasn't too difficult.