Sharp corners on FEL leading edge

   / Sharp corners on FEL leading edge #21  
Sorry you got hurt. By lowering your bucket to the ground before leaving the seat of your tractor you eliminate the possibility of hitting your head on the bucket edge. This method is SOP for tractor safety, and part of situational awareness.
 
   / Sharp corners on FEL leading edge
  • Thread Starter
#22  
Think my 410 loader even had paint on it at 660 hours. First thing I did with it was to move 22 tons of gravel. Didn't take the paint off. Good JD paint.

Paint came almost totally off the Gravely snow plow I had. Sprayed it with the same stuff I put on the corners of this one. Never rusted. The rust reformer stuff turns FeO to black FeS.

Ralph
 

Tractor & Equipment Auctions

2003 Atlas Copco 75kW ABB Rotterdam 220psi Air Compressor (A52377)
2003 Atlas Copco...
2008 Ford F-750 Crew Cab Pro Patch TCM-425-135 Asphalt Patcher Truck (A51692)
2008 Ford F-750...
Generac Yanmar 5000Watt Heavy Duty Diesel Generator (A51691)
Generac Yanmar...
John Deere 853 20ft Corn Head (A53473)
John Deere 853...
CAT 416B (A47477)
CAT 416B (A47477)
2016 FREIGHTLINER  CASCADIA (INOPERABLE) (A53843)
2016 FREIGHTLINER...
 
Top