Sharp corners on FEL leading edge

   / Sharp corners on FEL leading edge #21  
Sorry you got hurt. By lowering your bucket to the ground before leaving the seat of your tractor you eliminate the possibility of hitting your head on the bucket edge. This method is SOP for tractor safety, and part of situational awareness.
 
   / Sharp corners on FEL leading edge
  • Thread Starter
#22  
Think my 410 loader even had paint on it at 660 hours. First thing I did with it was to move 22 tons of gravel. Didn't take the paint off. Good JD paint.

Paint came almost totally off the Gravely snow plow I had. Sprayed it with the same stuff I put on the corners of this one. Never rusted. The rust reformer stuff turns FeO to black FeS.

Ralph
 

Tractor & Equipment Auctions

500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
2013 International WorkStar 7500 T/A Altec D3060BTR Insulated Digger Derrick Truck (A55973)
2013 International...
Cummins DGDA 80kW Diesel Generator (A56857)
Cummins DGDA 80kW...
2015 MACK CHU613 DAY CAB ROAD TRACTOR (A58375)
2015 MACK CHU613...
2018 International DuraStar 4300 TMA Attenuator Truck (A55973)
2018 International...
2014 Volvo L60G Articulated Wheel Loader (A56857)
2014 Volvo L60G...
 
Top