Bquick
New member
Does any one know if JD ever made a sickle mower that works on side hills?
Sickle mower
- Thread starter Bquick
- Start date
- Views: 2909
-
- Tags
- sickle bar mower
raheimdal
Bronze Member
- Joined
- Jul 19, 2008
- Messages
- 76
- Location
- Wisconsin
- Tractor
- JD M, JD B, JD A, JD 50, JD 60, JD 420 JD 530, JD 630, JD 1010, JD 1010 Crawler,JD 3020G, JD 3020D, JD 2520 Compact Utility, JD 4720 Compact Utility
You mean where the sickle is at a different angle than the mower frame? Almost all mowers allow for some slight variation above or below a true flat angle.
If you are looking for a mower that the cutter bar will operate regardless of angle, then you need to get into one without a pitman stick. There may be others, but the number 10 belly mount mower is the first JD one to support this that I know of.
If you are looking for a mower that the cutter bar will operate regardless of angle, then you need to get into one without a pitman stick. There may be others, but the number 10 belly mount mower is the first JD one to support this that I know of.
Tx Jim
New Member
sweettractors
Advertiser
The John Deere 350 does a good job on hills. We sell several of those every year. Ken Sweet
sweettractors
Advertiser
The JD 350 came with 3 point hitch and works on all tractors with that setup. The JD 450 is the same mower platform on hydraulic wheel carrier. The 450 is good if you don't have 3 point on your tractor. Ken Sweet