simplicity 3410garden tractor

   / simplicity 3410garden tractor #1  

farm boy00

Veteran Member
Joined
Jul 17, 2014
Messages
1,297
Location
Howard City, MI
Tractor
John Deere M&MT, Case 1030 comfort king, Sears ST16, Craftsmen 6000, homemade articulation mini-loader
I need a wiring diagram for the engine/starting. tried to find one a while ago but it don't work. Any ideas?? Tractor is right around the 80s I would say

ForumRunner_20150403_133441.png



ForumRunner_20150403_133449.png



ForumRunner_20150403_133457.png
 
   / simplicity 3410garden tractor #2  
can you describe the problem you are having someone here can help maybe is it starter or charging problem
 
   / simplicity 3410garden tractor
  • Thread Starter
#3  
can you describe the problem you are having someone here can help maybe is it starter or charging problem

2years ago I had a fire in the wiring. Kinda cobbled it but fix it then decided to redo it. Changed everything to new wiring and then when I hooked the battery cables when both were hooked it started rolling over and firing. Had to storage the tractor for a year and now got it out and started again fixing it
 
   / simplicity 3410garden tractor #4  
if by some chance it is a starter/generator combo this is correct can you see any numbers on the starter this will help us i/d the unit as to what it does or possibly a picture would be most helpful.
 
   / simplicity 3410garden tractor
  • Thread Starter
#5  
if by some chance it is a starter/generator combo this is correct can you see any numbers on the starter this will help us i/d the unit as to what it does or possibly a picture would be most helpful.

Can do tomorrow. It's a combo. The generator/starter is good. What I need is a diagram to figure out the voltage regulator like the one I found and am going to try out

Landlord Key start electrical.jpg
 
   / simplicity 3410garden tractor #6  
most of these combos are regulator that are specific to the combo can you see if the unit has a delco number on it . if not let me know i will supply part numbers that are possible fits dont get scared they may only be about 3 or 4 numbers of which some are interchangeable
 
   / simplicity 3410garden tractor
  • Thread Starter
#7  
most of these combos are regulator that are specific to the combo can you see if the unit has a delco number on it . if not let me know i will supply part numbers that are possible fits dont get scared they may only be about 3 or 4 numbers of which some are interchangeable

Delco?? Like modal

ForumRunner_20150406_230622.png
 

Tractor & Equipment Auctions

6000LB Axle (single) (A49251)
6000LB Axle...
2 3/8 DRILL PIPE (A48992)
2 3/8 DRILL PIPE...
2005 International Rollback Truck w/ Title (A49251)
2005 International...
New/Unused 7ft 20 Drawer Stainless Steel Workbench (A48837)
New/Unused 7ft 20...
1993 INTERNATIONAL 9700 TANDEM AXLE CAB OVER (A45679)
1993 INTERNATIONAL...
7,000 LB Axle (set of 3) (A49251)
7,000 LB Axle (set...
 
Top