Small but annoying problem..

   / Small but annoying problem.. #31  
You glove solution may work, but anything that is durable is what you need to take up the gap, maybe some thick plastic. If the gloves don't last try something else and I'm sure you will eventually find something.
 
   / Small but annoying problem..
  • Thread Starter
#32  
You glove solution may work, but anything that is durable is what you need to take up the gap, maybe some thick plastic. If the gloves don't last try something else and I'm sure you will eventually find something.

Yep, the left side had four plastic bumpers, the kind used for cabinets, and they held up for quite a while. They're still there with the glove finger between. I could use some old shoe leather if the glove stuff wears out too fast, but even if they last a month or so, I always have worn out work gloves around.
 
   / Small but annoying problem.. #33  
I used a small piece of 1/2” per pipe and shut the rops on it.
 
   / Small but annoying problem.. #34  
Like 5030 mentioned, a plastic washer at the hinge point and tighten it down well. I did that on my Kubota (2 on each tube) and it silenced the ROPS. Haven't had any noise all year. I usually leave it folded down, but it hasn't impeded folding back up when working on slopes.

Replace pins with bolts and just loosen when u want to fold it down (my NH has pins at the hinge point). Just a thought.
 

Tractor & Equipment Auctions

1999 FREIGHTLINER FL80 (A50854)
1999 FREIGHTLINER...
2022 FREIGHTLINER CASCADIA SLEEPER (A51222)
2022 FREIGHTLINER...
NEW 2022 Load Trail CH 83IN x 18FT Equipment Trailer (A51039)
NEW 2022 Load...
2014 INTERNATIONAL 7400 SBA 42 LUBE TRUCK (A51406)
2014 INTERNATIONAL...
Quick Attach EZ Axe Skid Steer Tree Shear (A51039)
Quick Attach EZ...
2012 FREIGHTLINER CASCADIA (A50854)
2012 FREIGHTLINER...
 
Top