My hoe is mod. KB2376 serial #50228436
I need some grease fittings. I'm assuming these are metric I had a brass one on the pivot pin of the bucket and part of the mating surface is missing. Probably from clearing snow and backing up the steep bank to turn around. I probably ran it into to a rock. I'm fairly sure they don't put them where digging will harm them. The part shaped like a bolt head is 10mm. I was told by someone that if that size wrench fits it the threads are 8mm. Is that correct. I never know how to describe these things to parts places. If anyone knows the numbers for the other fittings on the hoe or the bucket I love to know where to find this out.
One parts wizzard suggested tapping all the holes to SAE. On the surface maybe but wouldn't you have to disassemble each place you did that and remove the metal shavings? Magnet? mabye but how would you know you got them all. I going on the assumption that matters.
I need some grease fittings. I'm assuming these are metric I had a brass one on the pivot pin of the bucket and part of the mating surface is missing. Probably from clearing snow and backing up the steep bank to turn around. I probably ran it into to a rock. I'm fairly sure they don't put them where digging will harm them. The part shaped like a bolt head is 10mm. I was told by someone that if that size wrench fits it the threads are 8mm. Is that correct. I never know how to describe these things to parts places. If anyone knows the numbers for the other fittings on the hoe or the bucket I love to know where to find this out.
One parts wizzard suggested tapping all the holes to SAE. On the surface maybe but wouldn't you have to disassemble each place you did that and remove the metal shavings? Magnet? mabye but how would you know you got them all. I going on the assumption that matters.