Posthole Digger Still looking for PHD - Leinbach or TSC/County Line?

[asylum575]

I finally got all my pieces to my Leinbach 7200JR for my BX24

I watched the installation video Everythingattachments has online. Very straight forward. It took Ted 9 minutes on the video, it took me three hours:laughing:
The big hassle was getting the shaft on the PTO. It simply would not go on. I filed down some burrs on the inside of the shaft coupler and still had to tap lightly with a 3 lb sledge hammer. It slid in and I need a crowbar for it to slide out. I'm hoping after a couple of holes, she'll slide a little better.

I test ran it and seems ok

 

[Nuru]

I finally got all my pieces to my Leinbach 7200JR for my BX24

I watched the installation video Everythingattachments has online. Very straight forward. It took Ted 9 minutes on the video, it took me three hours:laughing:
The big hassle was getting the shaft on the PTO. It simply would not go on. I filed down some burrs on the inside of the shaft coupler and still had to tap lightly with a 3 lb sledge hammer. It slid in and I need a crowbar for it to slide out. I'm hoping after a couple of holes, she'll slide a little better.

I test ran it and seems ok

gee that seems to be a bit stiff for the PTO shaft - maybe with more use, it will get easier and easier to get on and off.

 

[Rob-D]

You want that thing to be pretty loose. PTOs are not designed for excessive back pressure.

Rob