string in rebuild kit/to30

   / string in rebuild kit/to30 #1  

killbilly

New member
Joined
Feb 22, 2005
Messages
2
hey guys, i got a rebuild kit the other day for my old ferguson to30 and when i opened it there was some string in the box. is this supposed to be some sort of gasket or what. i can't find the application anywhere in the manual. thanks for the help.
 
   / string in rebuild kit/to30 #2  
Are we talking about a motor rebuild kit...if so the only thing I can imagine is that the rear main kind of looks like string (if you hold you tounge right), more like a shoe lace
 
   / string in rebuild kit/to30 #3  
Ditto. I've never been into a fergy.. but ford uses rope seals as mains... though i think they mostly leak or drip a little.. even if installed correctly. Luckilly napa can cross the ford rope seal over to a modern neophrene one.. Perhaps the fergy one can be crossed as well?

Soundguy
 
   / string in rebuild kit/to30 #4  
Could it be the pull string for pulling the upper rear main seal thru on a partial rebuild? I mean that is just a guess but it used to be a trick the old timers did to replace leaky rear mains without a complete tare down.

Mark
 
   / string in rebuild kit/to30 #5  
Could very well be. Especially if it is a hollow braid.

Soundguy
 

Tractor & Equipment Auctions

2024 40 ft. High Cube Shipping Container (A53117)
2024 40 ft. High...
2022 Chevrolet Tahoe FL SUV (A51694)
2022 Chevrolet...
Tiger Mowers 80in Super Duty Twin Flail Mower Tractor Attachment (A51691)
Tiger Mowers 80in...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
PAIR DIAMOND PLATE DBL AXLE FENDERS (A51247)
PAIR DIAMOND PLATE...
UNUSED LANDHERO LDH-T460 STAND ON SKID STEER (A51247)
UNUSED LANDHERO...
 
Top