string in rebuild kit/to30

   / string in rebuild kit/to30 #1  

killbilly

New member
Joined
Feb 22, 2005
Messages
2
hey guys, i got a rebuild kit the other day for my old ferguson to30 and when i opened it there was some string in the box. is this supposed to be some sort of gasket or what. i can't find the application anywhere in the manual. thanks for the help.
 
   / string in rebuild kit/to30 #2  
Are we talking about a motor rebuild kit...if so the only thing I can imagine is that the rear main kind of looks like string (if you hold you tounge right), more like a shoe lace
 
   / string in rebuild kit/to30 #3  
Ditto. I've never been into a fergy.. but ford uses rope seals as mains... though i think they mostly leak or drip a little.. even if installed correctly. Luckilly napa can cross the ford rope seal over to a modern neophrene one.. Perhaps the fergy one can be crossed as well?

Soundguy
 
   / string in rebuild kit/to30 #4  
Could it be the pull string for pulling the upper rear main seal thru on a partial rebuild? I mean that is just a guess but it used to be a trick the old timers did to replace leaky rear mains without a complete tare down.

Mark
 
   / string in rebuild kit/to30 #5  
Could very well be. Especially if it is a hollow braid.

Soundguy
 

Tractor & Equipment Auctions

JOHN DEERE 437E KNUCKLE BOOM LOADER (A51246)
JOHN DEERE 437E...
2022 JOHN DEERE 6120M LOT NUMBER 191 (A53084)
2022 JOHN DEERE...
1995 Ford F-700 Flatbed Truck (A53117)
1995 Ford F-700...
2020 GP Equipment 24in Excavator Bucket (A51691)
2020 GP Equipment...
Park Dump Trailer (A52377)
Park Dump Trailer...
Pitts Tri-Axle RGN Lowboy Equipment Trailer (A50322)
Pitts Tri-Axle RGN...
 
Top