T6 Driveshaft

   / T6 Driveshaft
  • Thread Starter
#11  
Thank you!

I am going to change the fluids and the motor mounts this weekend.

I am pretty sure they are the original mounts.
 
   / T6 Driveshaft
  • Thread Starter
#12  
Hello All:

Yesterday I replaced the rubber motor mounts and also found the bolts from the mounting plate to the engine loose on both sides of the engine.

The motor mounts were shot - visibly looked OK until they were removed.

I changed all oils and filters - Big difference in operating noise!!!!!!!!!!!!

Regards, Steve T 6
 
   / T6 Driveshaft #13  
I have a T7D. It says in the parts book that in you put hydraulic fluid in it, it will damage the pumps! You must use 15w40 motor oil in the hydraulic system.
The coupling between the engine and the transmission pump is in very bad condition on mine. Terramite priced the coupling at $180.12 plus shipping.
I'm looking for it cheaper, but no luck yet.
 

Tractor & Equipment Auctions

LIGHT TOWER (A56857)
LIGHT TOWER (A56857)
2014 CATERPILLAR 627K SCRAPER (A60429)
2014 CATERPILLAR...
JOHN DEERE 6140M TRACTOR (A60430)
JOHN DEERE 6140M...
19008 (A56859)
19008 (A56859)
2010 Deere 318D (A60462)
2010 Deere 318D...
2020 Global R3 Air Street Sweeper (A56857)
2020 Global R3 Air...
 
Top