T770 emissions delete?

[jca57jd]

Hey guys Im looking at buying a used T770 highflow to use Mulching. The unit im looking at is a 2014 or 2015 model with the t4i Kubota motor in it (pre complete tier 4) with only 200 hours. I found a company that offers a ecm reflash for this model that increases the horsepower and overrides all the emissions sensors on the computer. My question is has anybody deleted the dpf, Regen system, and egr on one of these yet?

 

[Jabonee]

Hey guys Im looking at buying a used T770 highflow to use Mulching. The unit im looking at is a 2014 or 2015 model with the t4i Kubota motor in it (pre complete tier 4) with only 200 hours. I found a company that offers a ecm reflash for this model that increases the horsepower and overrides all the emissions sensors on the computer. My question is has anybody deleted the dpf, Regen system, and egr on one of these yet?

Ya and I have a bridge in Brooklyn I'll sell you cheep.:laughing: The ECU software is proprietary and canot be changed by law. You cannot override the regen with out removing the DPF. It will soot up an clog. The IT 4 engine runs just fine. I know of several in the area with forestry cutters that work just fine Best run at high RPM and don't inhibit the regen when it occurs.:thumbsup:

 

[yellowdogsvc]

I use the It4 s750 for mulching. It has the Kubota and does just fine. My Tier 3 is slightly more powerful, I think, and the It4 is governed at 2400 rpm but it does fine. I wouldn't mess with the system too much unless you are certain it's going to work. The Bobcat software is complicated and any number of codes can shut you down.