Tatro / WR Long grapple combo install

   / Tatro / WR Long grapple combo install #61  
</font><font color="blue" class="small">( What is the opinion on these grapples that are much narrower than the bucket? )</font>

I like the small grapple with my rock bucket. I can pull the pins and snatch the jaws and cylinder off because they just weigh around 50 lb. Also, I have yet to find anything I can't clamp down on enough to lift with my narrow jaw including rocks that were so big my loader would hardly lift them. I didn't want to do a lot of welding, so buying the grapple as-is was ideal for me. For someone else, they may completely different needs and abilities. You just have to suit your own situation and use. /forums/images/graemlins/smile.gif
 
   / Tatro / WR Long grapple combo install #62  
. Is there any reason to make a cover plate to protect the hydraulic cylinder and lines like I've seen on some models?


I like the idea of the cover plate on a grapple, seems to give it additional protection when moving brush around.
 

Attachments

  • 886928-Grapple on the 45.jpg
    886928-Grapple on the 45.jpg
    89.9 KB · Views: 279
   / Tatro / WR Long grapple combo install #63  
. Is there any reason to make a cover plate to protect the hydraulic cylinder and lines like I've seen on some models?


I like the idea of the cover plate on a grapple, seems to give it additional protection when moving brush around.
 
   / Tatro / WR Long grapple combo install #64  
Thanks, I like the 48" grapple too.

In my opinion the cylinder covers are overkill, although they do lend some additional protection.
 
   / Tatro / WR Long grapple combo install #65  
Thanks, I like the 48" grapple too.

In my opinion the cylinder covers are overkill, although they do lend some additional protection.
 
   / Tatro / WR Long grapple combo install #66  
tlbuser,
Thanks for the link, that may persuade me to make my own? Although I did email Andy Tatro. I gave him my bucket information(dimensions) and his first reply was to ask additonal questions but noted that for my 72" bucket his cost would be "much more" for some reason /forums/images/graemlins/confused.gif So I'll see what he comes up with before I decide which way to go.
 
   / Tatro / WR Long grapple combo install #67  
tlbuser,
Thanks for the link, that may persuade me to make my own? Although I did email Andy Tatro. I gave him my bucket information(dimensions) and his first reply was to ask additonal questions but noted that for my 72" bucket his cost would be "much more" for some reason /forums/images/graemlins/confused.gif So I'll see what he comes up with before I decide which way to go.
 
   / Tatro / WR Long grapple combo install #68  
I sent him an email too, yesterday in the early afternoon. We can compare notes when he replies. I used the email address off of Pineridge's site so I hope that was valid.
 
   / Tatro / WR Long grapple combo install #69  
I sent him an email too, yesterday in the early afternoon. We can compare notes when he replies. I used the email address off of Pineridge's site so I hope that was valid.
 
   / Tatro / WR Long grapple combo install #70  
Joe,
I used the email addres that Jim posted htatro@bwsys.net and he responded to me. Now I'm waiting for the other stuff...price and delivery. I sent him some photos and measurements fo my bucket.
 

Tractor & Equipment Auctions

Komatsu PC138 (A50490)
Komatsu PC138 (A50490)
2020 CHEVROLET Z71 TEXAS EDITION TRUCK (A51406)
2020 CHEVROLET Z71...
2013 Case IH Magnum 315 MFWD Tractor (A50657)
2013 Case IH...
2017 DITCH WITCH RT30 (A51243)
2017 DITCH WITCH...
2021 Kubota SVL97-2HC Compact Track Loader (A50657)
2021 Kubota...
2008 Ford F-450 Crew Cab Service Truck (A49461)
2008 Ford F-450...
 
Top