Mendonsy
Veteran Member
No, but I'm sure the Chinese must make them. The counterfeit everything else.
Testing elec breaker to verify trip
- Thread starter s219
- Start date
- Views: 4049
No, but I'm sure the Chinese must make them. The counterfeit everything else.
CobyRupert
Super Member
No, but here's some cheap alternatives to fuses:
Industrial Toys
Super Star Member
- Joined
- Feb 25, 2008
- Messages
- 16,742
- Location
- Ontario Canada
- Tractor
- Kubota R510 Wheel Loader + Cab and backhoe, JD 6200 Open Station, Cushman 6150, 4x4, ten foot 56 hp Kubota diesel hydraulic wing mower, Steiner 430 Diesel Max, Kawasaki Diesel Mule, JD 4x2 Electric Gator
When I worekd on high rise construction as an elecrician (apprentice) we used to short out circuits rather then looking for the panels. It was scary to see how hard it was to blow some 15 amp circuits! I would put my money on the protection of fuses over breakers any time.
heviduty
Silver Member
- Joined
- Apr 18, 2012
- Messages
- 193
- Location
- central NC
- Tractor
- Kubota L3400HST/LA463 loader JD 318 / 3ph(cat. 0)
Not exactly counterfeit, but back in the early 80's Federal Pacific was purchased by Reliance Electric. When Reliance began snooping around the company they had just purchased, they found FP was taking circuit breakers off the assembly line and modifying/calibrating them to work correctly before sending them to UL for testing. FP executives were eventually sued by Reliance Electric because of this.
Eric Salop
Elite Member
One thought thought for anyone who may be thinking of trying to carry out a high current trip test - if you apply a significant excess load at the wall socket, that is fine if the breaker is working, but you also need to consider what would happen if it doesn't trip. The test load would have to be removed pretty quick, or else the cable insulation will start to degrade as the copper in the cable rappidly heats up. If in any doubt, I would fit another breaker, instead of trying to perform a test.
s219 - When my daughter was a year older than yours, she walked up to a Christmas tree and sucked one of the light bulbs (this was before most Christmas lights used LEDs). The add-on ground fault protection in the plug tripped before I could get to her. She had a very surprised expression, then tears, but no permanent harm. From that day on I have made sure that all our plug circuits have ground fault interrupters.
s219 - When my daughter was a year older than yours, she walked up to a Christmas tree and sucked one of the light bulbs (this was before most Christmas lights used LEDs). The add-on ground fault protection in the plug tripped before I could get to her. She had a very surprised expression, then tears, but no permanent harm. From that day on I have made sure that all our plug circuits have ground fault interrupters.
Mysfyt
Platinum Member
Just googled 'counterfeit circuit breakers' and it seems like all the major manufacturers have information on how to spot their genuine breaker. Leads me to believe this is a bigger problem than I thought. Think I'll go check the ones I installed in my shop two years ago.
