LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,561
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
Man, that could be a good resto project! I wonder if they will ship?:shocked:
Those Craigslist photos
- Thread starter bcp
- Start date
- Views: 133427
Dadnatron
Veteran Member
Don't even try to sell a UTV/ATV on CL... the market is so saturated they are all going for $1000
Travelover
Elite Member
I've seen a bunch of the old 3 wheeled ATVs for sale lately. I thought they'd been collected and melted down.
Last edited:
A lot of people think they are better than a 4 wheeler. They certainly had a lot more flotation so would go a lot more places.
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 14,872
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
Here's one not as silly as some. But still, no bargain.
A VN refurb 1970's Yanmar that arrived so long ago that the re-paint job has faded off. Its oil filter is still painted with the black paint applied during the refurb 10~15 years ago. And with the cost-cutting in those refurb shops, they may have re-used the oil filter that was on it when it came in.
zen-hon 2wd diesel tractor, Yanmar engine, 2 cylinder. - farm &...
Those are good solid tractors that run forever if they've had minimal maintenance. But 10+ years on a cheap -or used- oil filter? Think I'll pass on this one.
A VN refurb 1970's Yanmar that arrived so long ago that the re-paint job has faded off. Its oil filter is still painted with the black paint applied during the refurb 10~15 years ago. And with the cost-cutting in those refurb shops, they may have re-used the oil filter that was on it when it came in.
zen-hon 2wd diesel tractor, Yanmar engine, 2 cylinder. - farm &...
Those are good solid tractors that run forever if they've had minimal maintenance. But 10+ years on a cheap -or used- oil filter? Think I'll pass on this one.
old and tired
Veteran Member
So this is listed as: "...International Harvester Rolling Mulcher/cultipacker - $14,900" I've never seen one so I clicked. Good photos BTW so maybe should not be in this thread but WOW it looks so cool and the tractor, MF-1800, is a thing of beauty, too. Is it worth that much?!?!?!
<Edit> link to CL, just in case you are interested!! International Harvester Rolling Mulcher/cultipacker - farm & garden...
Which might be dead before long....
<Edit> link to CL, just in case you are interested!! International Harvester Rolling Mulcher/cultipacker - farm & garden...
Which might be dead before long....
Last edited:
sixdogs
Super Star Member
- Joined
- Dec 8, 2007
- Messages
- 13,745
- Location
- Ohio
- Tractor
- Kubota M7040, Kubota MX5100, Deere 790 TLB, Farmall Super C
Old and tired--that's likely from the 1970's and if still available would likely be $40,000+. Brillion still makes them and I've seen folding Brillions in the $50,000 area. They are called cultimulchers. A "cultipacker" would not have the tines in the middle.
His is likely worth it but at a farm auction I could see that selling for $8,000 to $9,000. A dealer would likely as maybe $12,000 or $17,000. These days, the big ones are a hard sell. They are wonderful tools for preparing seedbeds and are often pulled behind cultivators. I did a thread on rebuilding a Brillion cultimulcher a couple years back and not too hard to find.
His is likely worth it but at a farm auction I could see that selling for $8,000 to $9,000. A dealer would likely as maybe $12,000 or $17,000. These days, the big ones are a hard sell. They are wonderful tools for preparing seedbeds and are often pulled behind cultivators. I did a thread on rebuilding a Brillion cultimulcher a couple years back and not too hard to find.
LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,561
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
Well, those brackets added on would surely cost $675..... not....
