Toolbox finally completed!

   / Toolbox finally completed! #1  

YotaBota

Bronze Member
Joined
Sep 24, 2009
Messages
94
Location
Winnipeg, Manitoba, Canada
Tractor
2009 Kubota BX25
Couple of quickie pictures of the toolbox and bracket fabricated for my BX. It's an ammo box bolted to a 3/16" plate steel bracket. The box and bracket were sand blasted, 2 coats of POR 15, 2 coats of spray bomb gray primer, and 3 finish coats of Kubota orange. Actually twisted apart my 1/2-3/8 reducer to get the 3/4" nut off the base of the ROPS. Gott er torqued back in though! toobox 1.JPGtoolbox 2.JPGtoolbox 3.JPG
 
   / Toolbox finally completed! #2  
Nice job :thumbsup: I really like that bracket you fabbed up.
 
   / Toolbox finally completed! #4  
Nice, the bracket looks stout enough to compliment the ROPS!
 
   / Toolbox finally completed! #6  
Nice work! Like that you painted the inside of the box white (cream?) as well--that will make it easier to see small items, especially in low-light conditions.
 
   / Toolbox finally completed! #7  
Looks good and strong.
 
   / Toolbox finally completed! #9  
Looks good
 
   / Toolbox finally completed! #10  
That's a good design, and well executed. :thumbsup:
 

Tractor & Equipment Auctions

2021 Spartan SRT-XD Zero Turn Mower (A50860)
2021 Spartan...
2000 Thomas Built Saf-T-Liner MVP-ER Transit Passenger Bus (A48081)
2000 Thomas Built...
2022 Club Car Tempo Golf Cart (A48082)
2022 Club Car...
RIDE AND DRIVE INFO (A50775)
RIDE AND DRIVE...
2013 FELLING  SKINNYNECK TA LOWBOY (A50854)
2013 FELLING...
2016 Ford Escape AWD SUV (A50324)
2016 Ford Escape...
 
Top