Tough decision BX2200 or B7500
- Thread starter milkman13
- Start date
- Views: 2371
Will_C
Veteran Member
- Joined
- May 24, 2002
- Messages
- 1,777
- Location
- Upstate N.Y.
- Tractor
- Kubota L3560, Toro 52" and 60" ZTRs, Kubota RTV 900
Re: Tough decision BX2200 or B7500(NY Yankees Fan)
The BX gives a nicer cut for that exact reason, the MMM actually floats, with the gauge wheels only protecting from scalping, if set corectly. The difference is not dramatic, but it there. Trescrow has experience with both the BX and the B MMM's , maybe he can weigh in here.
The BX gives a nicer cut for that exact reason, the MMM actually floats, with the gauge wheels only protecting from scalping, if set corectly. The difference is not dramatic, but it there. Trescrow has experience with both the BX and the B MMM's , maybe he can weigh in here.
kyoders
Silver Member
milkman,
Unfortunately, the list of implements available is incredibly large, so it's not very practical to list ones that won't fit. Worse, implement X from manufacturer Y may not fit at all, but the same implement from manufacturer Y may fit just fine, so even going by type of implement isn't easy. As you look at what's available, you will see ones that will obviously be problems and others that might be problems, and others that probably won't be a problem. After you've had a BX for a while, you get a pretty good feel for what is what. Unfortunately, that doesn't help you much.
It might be possible to enlist other BX owners to contribute a list of the ones they had problems with, but where would we put it? I suppose I could start another thread and see where it gets. If there's enough response, I might be able to stick out on one of my web sites.
Kevin
Unfortunately, the list of implements available is incredibly large, so it's not very practical to list ones that won't fit. Worse, implement X from manufacturer Y may not fit at all, but the same implement from manufacturer Y may fit just fine, so even going by type of implement isn't easy. As you look at what's available, you will see ones that will obviously be problems and others that might be problems, and others that probably won't be a problem. After you've had a BX for a while, you get a pretty good feel for what is what. Unfortunately, that doesn't help you much.
It might be possible to enlist other BX owners to contribute a list of the ones they had problems with, but where would we put it? I suppose I could start another thread and see where it gets. If there's enough response, I might be able to stick out on one of my web sites.
Kevin
The belly mower on the bx will mow better. However should you chose to move up to the b7500 the difference will be so slight that I don't think you'll notice. If mowing is to be your primary use than the bx is a great way to go. However, the tasks that need to be done around a new house will always have you wishing for more HP and larger tires.
Anonymous Poster
Epic Contributor
- Joined
- Sep 27, 2005
- Messages
- 29,678
As I told Fabeats, Put them side by side. What would you rather be sitting on????? Come on! Go with the 7500 and be done with it. /forums/images/graemlins/grin.gif
FABEATS
Member
Yeah, that's what JB told me, and I hate to admit this he was right. I do love my tractor though, not more than my wife, welllllllllllllll!
FABEATS
Member
Hey JB you better change your profile, NO TRACTORS