- For your reciever hitch, get a locking cross-pin for the hitch. I had an acquiantance who almost lost a horse trailer when the hairpin retainer clip came out.
- Loose the S-loops for the safety chains. Get the loops with with safety clips
- Always cross the safety chains, so they cradle the tongue if it comes loose.
- Get lots of chain and binders from the get go. At least four binders...
- Get a spare key for the tractor. That way, when you leave the key in it, and it blows out going down the road, you can still use the tractor.
- Have rope hooks put on. It is handy when you haul lumber, ect. It is easier to tie knots and hitches to hooks than d-rings.
- When you get a lock for the trailer, get one with a big loop, so you can loop the trailer wire through it too. Helps keep it from dragging.
- #6 is a "carbiner"
- Lots of rope, bungees is good idea; lots of stuff you can tie off...
- Get extra bulbs and lenses; especially taillights
- Make sure the license plate is mounted someplace sturdy. If it is hanging, it will get hit or snagged
--- Get a spare tire! and spare tire mount! Most trialers do not come with one.
- Get a lug wrench to fit the trailer... Nothing like having a spare, but no good wrench...
- Always keep at least something loaded; lumber, extra tires, whatever. If someone asks to borrow it, tell them it has stuff loaded.