Trying to install rear remotes on L4400

Mande1992 · Nov 9, 2010

Interesting... that shows it being in series. That should work if the BH is open center as there will always be pressure from the outlet port. I guess I will have to check if my BH is open center... :confused2:

teg · Nov 9, 2010

Does your backhoe have a make/model?

dex3361 · Nov 9, 2010

I could be wrong but I think you would have to connect the BH hoses together if you took it off of the tractor.

HiddenHollow · Nov 9, 2010

I have a L3400 with a backhoe. When you disconnect the backhoe you must connect the hoses together.

dex3361 · Nov 9, 2010

HiddenHollow said:
I have a L3400 with a backhoe. When you disconnect the backhoe you must connect the hoses together.

Likely the same for the L4400 then. Thats what it looked like to me but I am so expert in hydraulics. :thumbsup:

Mande1992 · Nov 9, 2010

teg said:
Does your backhoe have a make/model?

It is a Yanmar YBH-600. I have a manual but it shows as having it's own pump which it doesn't have.

I actually have a L3400, I just hi-jacked this old thread :ashamed:

teg · Nov 10, 2010

Buying a pump would be cheaper then adding remotes... besides, I'm not too sure remotes will work with that backhoe. Most likely it has it's own oil tank in the frame and the valves are set to dump and pump oil from there... Not sure which pump to buy, ask that in hydraulics section... my guess it's going to run $500-ish????

ebjorgensen · Mar 11, 2012

Mande1992 said:
It is a Yanmar YBH-600. I have a manual but it shows as having it's own pump which it doesn't have.

I actually have a L3400, I just hi-jacked this old thread :ashamed:

Greetings!
I noted on a webpage that you might have operator and./or parts manuals for the Yanmar YBH-600 backhoe yes?
Interested
Thanks!

Ed
ebjorgensen@jorgie.net