Fuddyduddy1952
Elite Member
- Joined
- Aug 10, 2022
- Messages
- 2,700
- Tractor
- john deere
I removed a dead tree & stump next to a shed a couple weeks ago and planted 50 from Holland Bulb Co. using my Grandmother's bulb planter...no big deal.
Then I pulled the trigger ordering 1,000 from Holland Bulb. I chose an area and thought rows would look better curved. So I dug about 8" down thinking I could plant with tool then cover back with the loader bucket.
Don't do that.
What I did at last is simply use the backhoe bucket, teeth down, and sweep across. All I had do was roll tractor forward 8" each sweep then lay bulbs 6" apart in the slot, instead of a palm blister and trying to dump clay back evenly. I put compost, lime, 10-10-10 & pine needles down.
I'll post pictures after Chiropractor visits are over.
Then I pulled the trigger ordering 1,000 from Holland Bulb. I chose an area and thought rows would look better curved. So I dug about 8" down thinking I could plant with tool then cover back with the loader bucket.
Don't do that.

What I did at last is simply use the backhoe bucket, teeth down, and sweep across. All I had do was roll tractor forward 8" each sweep then lay bulbs 6" apart in the slot, instead of a palm blister and trying to dump clay back evenly. I put compost, lime, 10-10-10 & pine needles down.
I'll post pictures after Chiropractor visits are over.
