Upgrading to BX2680... Looking for input...

   / Upgrading to BX2680... Looking for input... #11  
I started with a BX2200 FEL MMM 14 years ago. If I'd stayed with that fantastic little machine I'd be crying, thinking about all the other BXs, Bs, Ls, Fs, Z and ZD Kubota made for me that I had missed using!!!! Course the BX2200 probably wouldn't lift my 6' Landpride Rotary mower or my front grapple and know it wouldn't pull out saplings with the JDUNN Grapple and not sure it would handle the hydraulic post hole digger but it was a great little BX! The BX2660 I owned also wouldn't handle the attachments. Some of the Bs I've owned maybe would handle them. That B7800, B2650 and B2620 were pretty strong and the B2320 was cute with those Ag tires but it was my first and last gear drive tractor. TRADE I SAY, TRADE!!!!!:laughing::D:laughing: Don't worry about the JT syndrome, it's just a rumor!:cool2: PS I recently bought a BX2370-1 with hydraulic valve instead of the BX2380 without hyd valve both priced the same with a 60" side discharge deck. I hate side discharge decks but a rear discharge wasn't available so I had the mulching kit added which eliminates the side discharge chute for mowing on both sides of the deck and stops the grass from blowing all over me, my wife and my grandson with the side exit cover plate that comes with the mulching kit. It mows great.
 
   / Upgrading to BX2680... Looking for input...
  • Thread Starter
#12  
Thanks all for the input and feedback. I really think that JT syndrome is contagious...
New rig should be delivered in the next couple of weeks...
-Jonathan
 
   / Upgrading to BX2680... Looking for input... #13  
I'm curious: why are you sticking with the BX? Why not upgrade to a B?

I agree. I've been dealing with this dilemma for about 15 years.

I have a B1750HST with bi speed turn and 60" terrain following MMM that I bought new in 1994. It currently has a bit over 500 hours on it.

For the past 15 years or so, I've casually shopped all manufacturers for anything that I might want to replace it with if I was surprised with a catastrophic failure. So far I have found nothing from any manufacturer that I like even remotely as well.

Bi speed turn, no longer available anywhere. Position control, not available on BX. Terrain following deck (much more versatile than suspended deck) not available on BX, though still available on some B series. Etc.

It looks like they may burry me with my B1750HST.

SDT
 
   / Upgrading to BX2680... Looking for input... #14  
Thanks all for the input and feedback. I really think that JT syndrome is contagious...
New rig should be delivered in the next couple of weeks...
-Jonathan

CONGRATULATIONS!!!!! :thumbsup::thumbsup::thumbsup:
People rarely regret what they bought but spend lots of time thinking about the I should ofs, especially when their machine stops working or needs a major repair.
NOW FOR THE WAIT!!!!:)
 
   / Upgrading to BX2680... Looking for input... #15  
Incoming: New BX2680 on turf tires with 344 FEL, 54" D/O deck and the 55" Commercial F/M Blower.

Replacing: A 11 yo Case Farmall DX 25E with 893 hours. It has L110 FEL, 60"mmm and a 64" Kubota B/U Blower.

Tractor due in any time now. Loader and Mower already @ dealer. Front Blower due in 11/15.............and yes, the wait has been a killer.
 

Tractor & Equipment Auctions

2006 Nissan Xterra 4x4 SUV (A51694)
2006 Nissan Xterra...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
Chain Link Fence (A51573)
Chain Link Fence...
1999 Hypac C-766 66" Double Drum Vibratory Roller (A52384)
1999 Hypac C-766...
JOHN DEERE 461R LOT NUMBER 61 (A53084)
JOHN DEERE 461R...
2016 KBH Fertilizer Tender Trailer - Isuzu Diesel, Hydraulic System, Rear Discharge (A53472)
2016 KBH...
 
Top