kubota bx2680

I recently purchased a 2020 BX2680 (September) and love it. I'm looking to attach a tiller and wanted to know if anyone has suggestions on brand, where to purchase, etc. I've been all over youtube, searched a couple vendors. Some won't ship to a residence. I just wanted to tap the knowledge of...

I posted a couple days ago about the possible purchase of a BX2680. I bought it. I received very good info/responses. So I'm hitting the well of knowledge again.... I'm looking at protecting the edge of my bucket and giving it a little more oomph. There are a couple aftermarket options but it...

I'm looking at a used 2020 BX2680. It has a loader and 5' grader. It has 135 hours on it. I'm looking at a small tractor to do some work in my yard (about 2 acres). Work will be grading paths, digging, moving soil, etc. I was looking at the Deere 1025 and this BX but came across the 2020 BX...

New tractor owner and installing the 54" mid mower easy over deck. Everything went fairly smooth except I am not sure if the PTO lock is fully engaged. Attached is a picture of how I have it hooked up but it seems to me that the "tooth" on the black lock bar should be in the lever hole, not...

I have a BX2680 with a 60" non drive over deck. Opinions on the Gator blades, and part# if you know. Thanks Dave

I believe my flasher switch is stuck in the down position and I can't seem to get it unstuck. It is always on now. Has anyone experienced this? My tractor stays outside. I use it.

Hello all! Last year I traded my BX1860 for a 2680. Love it! But, when mowing and doing a turn around (fairly sharp, but not pinned) I can feel grinding through the steering wheel. 4wd is off. Fluid is fine. I never felt this on my 1860. The amount of vibration/grinding varies a little...

My BX2680 has an oil leak in the back and I need to transport to the dealer. It only has 32 hrs so I'm hoping it is covered by warranty. Two questions, please: 1) What size trailer do I need? I recently rented a 6X12 U-haul for another job and that feels like it would work? Thoughts? 2) Do...

Hello! Does anyone out there have any recent quotes / actual pricing on a new BX2680? I know location plays it's part as do other things, but just to get a rough idea what to expect purchasing new from a dealer. I have searched this site high and low and have found next to nothing on the topic...

Hello Everyone, After a lot of research here and on youtube, I'm buying a BX2680. I've been talking with two Kubota dealers (one near my 11 acre property and one near where I live and work.) I'm used to negotiating a lot when buying vehicles and was wondering if you can also negotiate when...

Did Some mowing today on the Kubota, and when I got back I realized that my coolant was boiling in my overflow. Checked the radiator screen it was clear. Checked the oil it was fine. Checked the coolant and its full in the radiator but a little low in the overflow. It could be because it was...

Well here is my first video. It's what I think of my New Kubota. Kubota BX2680 walk around. - YouTube Hope you enjoy. Dave

Hello all I am in the market for a new scut and I am leaning towards the BX or the MF mentioned above. I stopped at a dealer the other day that sell both on the same lot so we did a side by side breakdown or differences and similarities. So now I am looking for real world advice from owners who...

I am in the process of switching from a Kubota B3350 cab to a BX 2680 with cab. To save a little money and to more easily add custom lights, I decided to do the install. The short story- Curtis and Kubota did a fabulous job! And read all the instructions,...First! Hard to do! The cab came in...

Considering a BX2680,Loader,front snowblower, factory cab,20hrs,2018 model year.The seller is looking for $18,000

I love the B3350 cab model with A/C and heat. I pickup my grass with the rear pto driven bagger. Works great using the 60 deck. But the machine is too heavy (2400lbs) and constantly tears up the lawn. Not full sun so weak grass. DPF issues have been solved for me but I know I will take a hit...

Hello I got two questions: 1. When I turn the key to get the glow plugs going...Once the plugs are ready, should the light go off? Of it remains on and I just need to make a judgement call to see when to crack it to start? 2. When I first turn the keys on, on the dash board I see some...

Well I pulled the trigger on a new 2680 with FEL and MMM. Didn’t get much play time on it this evening due to it being super wet from all the rain we’ve had. But I did get the rear tires off to have fluid put in. This should fit my small 11 acre farm nicely, I’ve got right around 3 acres cleared...

These 2 blades have been replaced on my BX2680 that has 54 hours on it When they are laid flat, as in the pic, they will wobble when each end is pushed down. They seem to be bent symmetrically Also note there is not one chip out of the cutting edge of the blades which indicates they did not...

Ok folks, this you won't believe. Had my son, who is a Master Diesel Tech @ a local Ford dealer do the FIRST 50-hr service on one of my smaller tractors. Pictures of the trans/hydraulic strainer tell the horrible story and this is the CRAP the Kubota Factory is leaving in their machines. My...

I have a belly mower deck for my finish cutting and a Brush Hog (rotary mower) to do under my trees. I am new to all this and today was the first time using the Brush Hog. I have watched videos on you tube from Merrick's and another guy who does a bunch of videos. Question 1. Is there a...

First time on this site. Looking for a set of stabilizer bars built by Mark Hodge to fit a Kubota BX2680.

Group, I've enjoyed our BX2660 for the past 8 years or so and I'm just about to pull the trigger on upgrading to a new 80 series unit. I've been working with the dealer on a trade in and and am ready to pull the trigger but would like this group's feedback on a couple of options: 1) Mid-Mount...

Hi All - Been researching here for a long time and was torn on whether to pick up a zero turn or CUT for my recently purchased land. I have 64 acres but only about 15-25 of it needs to be maintained. The property has been meticulously maintained and there are no large projects needed at the...

Wow it's been a long time since I've posted! So I've got my better half on board with the idea of upgrading from our x300 for mowing - all the way to a subcompact. I like the idea of having a diesel, 4wd, rops mower that can do other tasks around the house and garden like a smaller loader than...