WAKE UP!
- Thread starter Farmwithjunk
- Start date
- Views: 9452
daTeacha
Veteran Member
EEEWWWWWW!
/forums/images/graemlins/blush.gif
/forums/images/graemlins/shocked.gif
/forums/images/graemlins/laugh.gif
/forums/images/graemlins/grin.gif
BWAH HA HA HA HA HA!
/forums/images/graemlins/blush.gif
/forums/images/graemlins/shocked.gif
/forums/images/graemlins/laugh.gif
/forums/images/graemlins/grin.gif
BWAH HA HA HA HA HA!
daTeacha
Veteran Member
EEEWWWWWW!
/forums/images/graemlins/blush.gif
/forums/images/graemlins/shocked.gif
/forums/images/graemlins/laugh.gif
/forums/images/graemlins/grin.gif
BWAH HA HA HA HA HA!
/forums/images/graemlins/blush.gif
/forums/images/graemlins/shocked.gif
/forums/images/graemlins/laugh.gif
/forums/images/graemlins/grin.gif
BWAH HA HA HA HA HA!
GeneD14
Veteran Member
- Joined
- Jul 29, 2003
- Messages
- 1,458
- Location
- Tennessee
- Tractor
- Kubota B26 TLB, Allis Chalmers D17 series IV, Kubota ZG-23 Mower, Kubota ZD 1211, Kawasaki Mule 610, Stihl 361, Stihl 045 AV Super, and a Stihl 660 Ported and tuned
</font><font color="blue" class="small">( </font><font color="blueclass=small">( A group of about 3 or 4 copper heads one of which slung up and hit me in the back. )</font>
Well NOW you went and done it. I'll never be able to mow another weed in my life thinking about that. )</font>
I agree... I might just quit bush hogging all together after that one.
Well NOW you went and done it. I'll never be able to mow another weed in my life thinking about that. )</font>
I agree... I might just quit bush hogging all together after that one.
GeneD14
Veteran Member
- Joined
- Jul 29, 2003
- Messages
- 1,458
- Location
- Tennessee
- Tractor
- Kubota B26 TLB, Allis Chalmers D17 series IV, Kubota ZG-23 Mower, Kubota ZD 1211, Kawasaki Mule 610, Stihl 361, Stihl 045 AV Super, and a Stihl 660 Ported and tuned
</font><font color="blue" class="small">( </font><font color="blueclass=small">( A group of about 3 or 4 copper heads one of which slung up and hit me in the back. )</font>
Well NOW you went and done it. I'll never be able to mow another weed in my life thinking about that. )</font>
I agree... I might just quit bush hogging all together after that one.
Well NOW you went and done it. I'll never be able to mow another weed in my life thinking about that. )</font>
I agree... I might just quit bush hogging all together after that one.
Normmm
Gold Member
- Joined
- Mar 1, 2005
- Messages
- 288
- Location
- Talladega county, Sylacauga, AL
- Tractor
- Yanmar YM2020D Satoh Beaver III Yanmar 1500
( A group of about 3 or 4 copper heads one of which slung up and hit me in the back. ) I am going to get a set of chaines for my hog today.
Normmm
Gold Member
- Joined
- Mar 1, 2005
- Messages
- 288
- Location
- Talladega county, Sylacauga, AL
- Tractor
- Yanmar YM2020D Satoh Beaver III Yanmar 1500
( A group of about 3 or 4 copper heads one of which slung up and hit me in the back. ) I am going to get a set of chaines for my hog today.
scott_vt
Super Member
- Joined
- Oct 5, 2004
- Messages
- 7,752
- Location
- east wells,vt
- Tractor
- 1986 MF 1040, 1942 Farmall A, 1949 Farmall Super A
Sorry to hear about the kids bike /forums/images/graemlins/frown.gif Also sorry to hear about your nerves /forums/images/graemlins/grin.gif I was lookin foward to some hoggin time this weekend but Im thinkin you went and spoiled it for me /forums/images/graemlins/grin.gif
As far as the copper heads Jim, no thanks, thankfully we dont have many up this way /forums/images/graemlins/grin.gif
As far as the copper heads Jim, no thanks, thankfully we dont have many up this way /forums/images/graemlins/grin.gif
scott_vt
Super Member
- Joined
- Oct 5, 2004
- Messages
- 7,752
- Location
- east wells,vt
- Tractor
- 1986 MF 1040, 1942 Farmall A, 1949 Farmall Super A
Sorry to hear about the kids bike /forums/images/graemlins/frown.gif Also sorry to hear about your nerves /forums/images/graemlins/grin.gif I was lookin foward to some hoggin time this weekend but Im thinkin you went and spoiled it for me /forums/images/graemlins/grin.gif
As far as the copper heads Jim, no thanks, thankfully we dont have many up this way /forums/images/graemlins/grin.gif
As far as the copper heads Jim, no thanks, thankfully we dont have many up this way /forums/images/graemlins/grin.gif
PineRidge
Super Member
Hit a broken cinder block and it took out the shear pin with it. The PTO shaft then popped off an external snap ring thats supposed to be a safety measure for the shaft, and the whole PTO came loose from the gearbox on the rotary cutter. The PTO shaft was flailing around like a kid with a baseball bat trying to hit a home run. EEOUCH
PineRidge
Super Member
Hit a broken cinder block and it took out the shear pin with it. The PTO shaft then popped off an external snap ring thats supposed to be a safety measure for the shaft, and the whole PTO came loose from the gearbox on the rotary cutter. The PTO shaft was flailing around like a kid with a baseball bat trying to hit a home run. EEOUCH
GeneD14
Veteran Member
- Joined
- Jul 29, 2003
- Messages
- 1,458
- Location
- Tennessee
- Tractor
- Kubota B26 TLB, Allis Chalmers D17 series IV, Kubota ZG-23 Mower, Kubota ZD 1211, Kawasaki Mule 610, Stihl 361, Stihl 045 AV Super, and a Stihl 660 Ported and tuned
I love to bush hog without the loader on...what a sense of freedom! But when I am in tall grass with unknown obsticles I keep the loader on and the bucket hovering just off the ground. That is a tip that I learned on this site a few years ago and what a life saver it has been!
I have hit alot of softball sized rocks in the past and wow! What a bang those make! /forums/images/graemlins/shocked.gif
I have hit alot of softball sized rocks in the past and wow! What a bang those make! /forums/images/graemlins/shocked.gif
GeneD14
Veteran Member
- Joined
- Jul 29, 2003
- Messages
- 1,458
- Location
- Tennessee
- Tractor
- Kubota B26 TLB, Allis Chalmers D17 series IV, Kubota ZG-23 Mower, Kubota ZD 1211, Kawasaki Mule 610, Stihl 361, Stihl 045 AV Super, and a Stihl 660 Ported and tuned
I love to bush hog without the loader on...what a sense of freedom! But when I am in tall grass with unknown obsticles I keep the loader on and the bucket hovering just off the ground. That is a tip that I learned on this site a few years ago and what a life saver it has been!
I have hit alot of softball sized rocks in the past and wow! What a bang those make! /forums/images/graemlins/shocked.gif
I have hit alot of softball sized rocks in the past and wow! What a bang those make! /forums/images/graemlins/shocked.gif
deere_x475guy
Gold Member
Gene, I am with you. I love to bushhog w/o my loader also but when I am doing some virgin area I haven't been in before I always have the loader on and low.
BTW you are still welcome over anytime you want.
BTW you are still welcome over anytime you want.
deere_x475guy
Gold Member
Gene, I am with you. I love to bushhog w/o my loader also but when I am doing some virgin area I haven't been in before I always have the loader on and low.
BTW you are still welcome over anytime you want.
BTW you are still welcome over anytime you want.
AndyM
Veteran Member
- Joined
- Jul 4, 2003
- Messages
- 2,369
- Location
- NW PA, USA
- Tractor
- 1948 Ford 8N and 1993 Toro WheelHorse 520H
The first time I brush-hogged our property after we bought it, I "found" a few old tires, an acethylene tank and a car battery, among other things.
AndyM
Veteran Member
- Joined
- Jul 4, 2003
- Messages
- 2,369
- Location
- NW PA, USA
- Tractor
- 1948 Ford 8N and 1993 Toro WheelHorse 520H
The first time I brush-hogged our property after we bought it, I "found" a few old tires, an acethylene tank and a car battery, among other things.
browns40
Gold Member
Has to be this old cast iron wagon axle I disovered last summer on the edge of the field... luckily just blew apart half of the spindle on one side of it, but what a racket!
On a side note, it did give me a pretty good serrated edge on the blades! /forums/images/graemlins/crazy.gif
On a side note, it did give me a pretty good serrated edge on the blades! /forums/images/graemlins/crazy.gif
browns40
Gold Member
Has to be this old cast iron wagon axle I disovered last summer on the edge of the field... luckily just blew apart half of the spindle on one side of it, but what a racket!
On a side note, it did give me a pretty good serrated edge on the blades! /forums/images/graemlins/crazy.gif
On a side note, it did give me a pretty good serrated edge on the blades! /forums/images/graemlins/crazy.gif
