WAKE UP!

   / WAKE UP! #61  
Beyond the rocks and stumps, I nailed some long-retired fence posts and a wire roll while hoggin along the treeline of an old hops field. Took a while to get all that wire cut loose. Last year, I moved the carhauler and launched the jack skidshoe about 100' with the RCK60 MMM. Had forgotten to put the skidshoe pin in. Thankfully, no casualties either time. /forums/images/graemlins/blush.gif
 
   / WAKE UP! #62  
Beyond the rocks and stumps, I nailed some long-retired fence posts and a wire roll while hoggin along the treeline of an old hops field. Took a while to get all that wire cut loose. Last year, I moved the carhauler and launched the jack skidshoe about 100' with the RCK60 MMM. Had forgotten to put the skidshoe pin in. Thankfully, no casualties either time. /forums/images/graemlins/blush.gif
 
   / WAKE UP! #63  
I found an old piece of top pipe 3" iron pipe about a 40' section. /forums/images/graemlins/shocked.gif

BLAM BAAAAM BLANG BOOM BANG!!! had been hoggin for long enough for it to be a complete surprise. /forums/images/graemlins/crazy.gif

Anyway the pipe had been there so long that the only parts you could tell from the dirt were where the blades hit.
 
   / WAKE UP! #64  
I found an old piece of top pipe 3" iron pipe about a 40' section. /forums/images/graemlins/shocked.gif

BLAM BAAAAM BLANG BOOM BANG!!! had been hoggin for long enough for it to be a complete surprise. /forums/images/graemlins/crazy.gif

Anyway the pipe had been there so long that the only parts you could tell from the dirt were where the blades hit.
 
   / WAKE UP! #65  
Newbie tractor owner here. Just took delivery last week of a Kubota 4630 with a Rhino SE6 bushhog. Both my wife and I have been working the heck out of this thing trying to get our property cut down. We both thought the ant mounds were pretty tough on the bushhog. Some loud BAMM's and violent shaking. We've since discovered more little 'treasures' the past owner left in the fields for us to find, and run over. Worse so far was when I came home to find my wife kinda quiet and told me there was good news and bad news. Oh boy, I think some of you guys know the hollow feeling you get when your wife says those words. She said, the good news is that I didn't break the lawnmower..(background, here lately, most every time she gets on it, something breaks or jams), then she said, I think I broke the tractor...

Come to find out, the previous owner had left a t-pole just laying out in a field, (flat fortunately) and she had hit it with the bushhog, made a terrible racket and vibrated like fury....Scared my wife so much she shut off the 'hog, drove back up to the house and shut it down and waited for me to come in so she could 'fess up. All I could do was tell her it probably didn't do much and I'd have hit it if she hadn't and not to worry about it.

Braced the rig up, looked underneath it, not a mark on the blades, not a nick, not a scratch...NOTHING. Guess you could say I'm thankful they build these things as tough as they do.

Did notice I needed to sharpen the blades...only have 10-15 hours on it, is this normal or did the t-pole help me out with dulling them some?

For myself, I've hit a head-sized rock before but the most scary was when I picked up a 50 foot long piece of wire that the thoughtful previous owner had left out in a field...could just visualize it swinging up and doing a number on me as it whipped by but nothing came of it.
 
   / WAKE UP! #66  
Newbie tractor owner here. Just took delivery last week of a Kubota 4630 with a Rhino SE6 bushhog. Both my wife and I have been working the heck out of this thing trying to get our property cut down. We both thought the ant mounds were pretty tough on the bushhog. Some loud BAMM's and violent shaking. We've since discovered more little 'treasures' the past owner left in the fields for us to find, and run over. Worse so far was when I came home to find my wife kinda quiet and told me there was good news and bad news. Oh boy, I think some of you guys know the hollow feeling you get when your wife says those words. She said, the good news is that I didn't break the lawnmower..(background, here lately, most every time she gets on it, something breaks or jams), then she said, I think I broke the tractor...

Come to find out, the previous owner had left a t-pole just laying out in a field, (flat fortunately) and she had hit it with the bushhog, made a terrible racket and vibrated like fury....Scared my wife so much she shut off the 'hog, drove back up to the house and shut it down and waited for me to come in so she could 'fess up. All I could do was tell her it probably didn't do much and I'd have hit it if she hadn't and not to worry about it.

Braced the rig up, looked underneath it, not a mark on the blades, not a nick, not a scratch...NOTHING. Guess you could say I'm thankful they build these things as tough as they do.

Did notice I needed to sharpen the blades...only have 10-15 hours on it, is this normal or did the t-pole help me out with dulling them some?

For myself, I've hit a head-sized rock before but the most scary was when I picked up a 50 foot long piece of wire that the thoughtful previous owner had left out in a field...could just visualize it swinging up and doing a number on me as it whipped by but nothing came of it.
 
   / WAKE UP! #67  
</font><font color="blue" class="small">( Did notice I needed to sharpen the blades...only have 10-15 hours on it, is this normal or did the t-pole help me out with dulling them some? )</font>
Don't expect those blades to be sharp like a lawnmower's blade. They're not designed that way, and sharpening down to lawnmower type edge makes it extra easy to chip them. They're usually almost dull feeling, but at the blade tip speed are great for saplings and such.
John
 
   / WAKE UP! #68  
</font><font color="blue" class="small">( Did notice I needed to sharpen the blades...only have 10-15 hours on it, is this normal or did the t-pole help me out with dulling them some? )</font>
Don't expect those blades to be sharp like a lawnmower's blade. They're not designed that way, and sharpening down to lawnmower type edge makes it extra easy to chip them. They're usually almost dull feeling, but at the blade tip speed are great for saplings and such.
John
 
   / WAKE UP! #69  
Like John said, the leading edge (sharp edge) of a brush hog blade normally has a 1/8" flat or rounded edge; not a sharp edge. They can be sharpened more if you know all you'll be cutting is grass and weeds, but for anything else you're probably better off leaving them "dull" to prevent damage to them.
 
   / WAKE UP! #70  
Like John said, the leading edge (sharp edge) of a brush hog blade normally has a 1/8" flat or rounded edge; not a sharp edge. They can be sharpened more if you know all you'll be cutting is grass and weeds, but for anything else you're probably better off leaving them "dull" to prevent damage to them.
 

Tractor & Equipment Auctions

iDrive TDS-2010H ProJack M2 Electric Trailer Dolly (A59228)
iDrive TDS-2010H...
2022 Greenworks CU400W Commercial Work Utility Vehicle DEMO UNIT (A56438)
2022 Greenworks...
Kubota SVL75-2 (A57148)
Kubota SVL75-2...
2001 International 4000 DT 466E (A60462)
2001 International...
2023 New Holland CR10.90 Combine - 330 Engine Hours - 251 Separator Hours (A56436)
2023 New Holland...
30 INCH TOOTHLESS BUCKET FOR MINI EXCAVATOR (A58214)
30 INCH TOOTHLESS...
 
Top