Warn 2.5ci wench problem

   / Warn 2.5ci wench problem #22  
I'm betting it depends on what model Warn you are talking about, some are made cheaper than others.

I have Warn, HF, Ramsey and a few others, and they aren't all from china.

SR
 
   / Warn 2.5ci wench problem #24  
Should you buy a little more winch than your task calls for, then the winch may work a little less in the world of straining.

Regardless of where it may or not be manufactured.
 
   / Warn 2.5ci wench problem #25  
The range of winches on the market is very broad. The bottom end isn't worth bolting on. The top end is hard to justify.

My uses of a winch are offroad. I only buy top end.

With winches, you get what you pay for.

I burned up a Warn 2,500 lb winch on a side by side. It was under warranty. Shipped it to Warn and they rebuilt it. No charge. The side by side now has a Warn 4,500 lb winch.

Good luck with your repair.
 
   / Warn 2.5ci wench problem #26  
The biggest cause of failure for a winch is getting it wet or muddy and never running it in and out. I have the cheapest winch you could buy at HF, put on my atv over 10 years ago. that winch has been underwater at least 100 times. I make sure to run it in and out a couple times a season. Still works flawless.
 
   / Warn 2.5ci wench problem #27  
The biggest cause of failure for a winch is getting it wet or muddy and never running it in and out. I have the cheapest winch you could buy at HF, put on my atv over 10 years ago. that winch has been underwater at least 100 times. I make sure to run it in and out a couple times a season. Still works flawless.
Wow, how does your ATV handle that?
 
   / Warn 2.5ci wench problem #28  
Wow, how does your ATV handle that?
fine, weighs 500, rated 1500, snatch block if needed, but haven't. prolly 30-40 hard pulls. doesn't get a ton of use, but it goes underwater a whole lot back in the day.
 
   / Warn 2.5ci wench problem #29  
fine, weighs 500, rated 1500, snatch block if needed, but haven't. prolly 30-40 hard pulls. doesn't get a ton of use, but it goes underwater a whole lot back in the day.
The under water part was what I wondered about.
 

Tractor & Equipment Auctions

Forklift (A56857)
Forklift (A56857)
(APPROX. 20) 4' X 8' X 3/8" SHEETING (A52706)
(APPROX. 20) 4' X...
2025 AGT YC-32G Saw Mill (A53317)
2025 AGT YC-32G...
2015 TROXELL 130BBL STEEL (A58214)
2015 TROXELL...
2002 Frieghtliner Pressure Digger Truck (A55973)
2002 Frieghtliner...
Kubota M108S (A53317)
Kubota M108S (A53317)
 
Top