Welcome to my Nightmare!!!!

   / Welcome to my Nightmare!!!! #251  
</font><font color="blue" class="small">( The only ones I could find were stainless steel )</font> <font color="blue"> </font>

Hey Eddie, I would put some anti-seize on those stainless bolts before getting the two dis-similar metals (stainless and iron)hot by running the engine... They like to seize up when heat is added... not sure if you had any bad experiences with this before ,but you don't want to... especially considering the potential of something that may be changed on an annual basis (thermostat/'s) /forums/images/graemlins/smile.gif

Good Luck!!
 
   / Welcome to my Nightmare!!!! #252  
</font><font color="blue" class="small">( The only ones I could find were stainless steel )</font> <font color="blue"> </font>

Hey Eddie, I would put some anti-seize on those stainless bolts before getting the two dis-similar metals (stainless and iron)hot by running the engine... They like to seize up when heat is added... not sure if you had any bad experiences with this before ,but you don't want to... especially considering the potential of something that may be changed on an annual basis (thermostat/'s) /forums/images/graemlins/smile.gif

Good Luck!!
 
   / Welcome to my Nightmare!!!! #253  
</font><font color="blue" class="small">( I'm afraid to start it. What if I did something even dumber than not adjust the valves right??? )</font>

In that case, be sure Steph's standing by with the camera ready and focused when you start it the first time. /forums/images/graemlins/laugh.gif Might get some good action photos. /forums/images/graemlins/wink.gif
 
   / Welcome to my Nightmare!!!! #254  
</font><font color="blue" class="small">( I'm afraid to start it. What if I did something even dumber than not adjust the valves right??? )</font>

In that case, be sure Steph's standing by with the camera ready and focused when you start it the first time. /forums/images/graemlins/laugh.gif Might get some good action photos. /forums/images/graemlins/wink.gif
 
   / Welcome to my Nightmare!!!! #255  
I like action shots. /forums/images/graemlins/grin.gif But not at Eddie's expense. /forums/images/graemlins/tongue.gif
 
   / Welcome to my Nightmare!!!! #256  
I like action shots. /forums/images/graemlins/grin.gif But not at Eddie's expense. /forums/images/graemlins/tongue.gif
 
   / Welcome to my Nightmare!!!!
  • Thread Starter
#257  
Nasty,

Nope, I put some Duralube on the threads and tightened it up. Hopefully I'll be done with the dozer and sell it before I have to replace the thermostats. Do you really replace them every year? I've never heard of that.


Rob,

I was watching Dirty Jobs last night and they had a John Deer track loader with no ROPS on it for getting under a house they were moving. That must have been a real popular tractor for Deere.

I hope you have more fun with your rebuild than I am. /forums/images/graemlins/grin.gif


I've been trying to start it without any luck. I can squirt a shot of starting fluid into the intake and it will fire right up, but then it dies.

I think I'm not getting any fuel, but don't know how to fix this.

Any ideas???????/ /forums/images/graemlins/frown.gif

Eddie
 
   / Welcome to my Nightmare!!!!
  • Thread Starter
#258  
Nasty,

Nope, I put some Duralube on the threads and tightened it up. Hopefully I'll be done with the dozer and sell it before I have to replace the thermostats. Do you really replace them every year? I've never heard of that.


Rob,

I was watching Dirty Jobs last night and they had a John Deer track loader with no ROPS on it for getting under a house they were moving. That must have been a real popular tractor for Deere.

I hope you have more fun with your rebuild than I am. /forums/images/graemlins/grin.gif


I've been trying to start it without any luck. I can squirt a shot of starting fluid into the intake and it will fire right up, but then it dies.

I think I'm not getting any fuel, but don't know how to fix this.

Any ideas???????/ /forums/images/graemlins/frown.gif

Eddie
 
   / Welcome to my Nightmare!!!! #259  
Bled the system?? New fuel filters?? Fill the filter containers with diesel....Check your injector pump timing...BobG in VA
 
   / Welcome to my Nightmare!!!! #260  
Bled the system?? New fuel filters?? Fill the filter containers with diesel....Check your injector pump timing...BobG in VA
 

Tractor & Equipment Auctions

2014 CATERPILLAR CT660S SBA 6X4 DUMP TRUCK (A51406)
2014 CATERPILLAR...
2019 BOBCAT S770 SKID STEER (A52705)
2019 BOBCAT S770...
2015 CATERPILLAR CT660 TANDEM AXLE DUMP TRUCK (A54313)
2015 CATERPILLAR...
Informational Lot - Financing (A53473)
Informational Lot...
Unused Delta Crash Attenuators (A49461)
Unused Delta Crash...
2016 PETERBILT 579 (A53843)
2016 PETERBILT 579...
 
Top