What did you break today?

[sd455dan]

Grapple Tine, It was Only bent (trying to pry out a stump) and I decided to (Fix) it by pressing

 

[tacticalturnip]

Yesterday, for both fun and profit, I beamed my loader level indicator off of my garage opening. The tube is fine, the rod has a nice 45 degree bend in it.

I meant to snap photos, but I was too busy cussing myself out.

 

[two_bit_score]

Yesterday, for both fun and profit, I beamed my loader level indicator off of my garage opening. The tube is fine, the rod has a nice 45 degree bend in it.

I meant to snap photos, but I was too busy cussing myself out.

A good thread to revive.

 

[kneedeep]

It's still too wet here for any tractoring the next few days.
It's been a while since anything broke that required heat, weld or big hammer to fix.
Im sure that will change in the next couple of months.
Something always breaks!

 

[scootr]

Forgot to raise the brush hog when driving through the gate. It hooked the pipe set in concrete to hold the center pin for the double gates... a 3 ft bar was needed to shape it up and bend it back. Not the prettiest repair but its working again.
May have broke something yesterday. I tripped on the outdoor stairs with my arms full so I turned a shoulder to the ground. That really stung. And last night and today it still hurts like crazy. Hope I didn't break something

 

[tacticalturnip]

A good thread to revive.

I thought so as well; that said, I swear there was one newer than 2017 but I could not find it.

 

[gstrom99]

We did some rototilling this weekend and busted the rear u-joint and ruined the yoke on the PTO shaft. I'm glad it was a rental. The SIL has to return it tomorrow...

 

[scootr]

We did some rototilling this weekend and busted the rear u-joint and ruined the yoke on the PTO shaft. I'm glad it was a rental. The SIL has to return it tomorrow...

Hope you bought the rental insurance

 

[stompybritches]

Not sure if 'almost' counts but I've been pushing my luck with my walk-behind DR brush hog today and yesterday. Gear engage starting to stutter. I just sweet talk and let it idle in neutral more, recovers ok so far before ripping thru sagebrush.
Now, if you want to talk about killing sawzall's and chainsaws I can testify to being a regular serial killer there but I do manage to resurrect them. Juniper and sage don't play nice with any cutting edge.

 

[DarkBlack]

Broke the plastic cover thats attached over the top of my pickup truck tailgate, today.
Minor, but disappointing