What did you do on or to your LS Tractor today?

[chas0218]

It's been my experience that it takes longer to cool down. For example, a 80 degree day mowing for hours will take mine about 5 minutes to cool down. That is parked with the AC off. The other day it was 1ｰF and it took about 1.5 minutes to cool.

I monitor the EGT probe through the obd port and I look for 350 degrees or less before I shut it off. So if you don't have a gauge I'd suggest letting it cool a bit longer.

What device do you use to monitor the live engine data?

 

[PCABE5]

What device do you use to monitor the live engine data?

OBD Link MX and their software.

 

[Diggin It]

I think I've burned more diesel in the last 2-3 days than I have in the last 2-3 months. Digging stuff, pushing stuff around, breaking dirt with the middle buster, dragging stuff with the landscape rake. Ground is still wet enough to slip tires under load in some places, but at least water isn't running across the surface and filling holes as fast as they appear.

 

[sodamo]

Tractor time

Needed some fork extensions this morning. Perhaps more the economy model
View attachment 644348

Still, quite effective
View attachment 644349

And very functional for placing my roof structure
View attachment 644350
View attachment 644351

No metal yet, tomorrow is another day
View attachment 644352
View attachment 644353

 

[Diggin It]

Drove around in circles for a while dragging stuff behind me:

https://www.tractorbynet.com/forums/projects/422674-how-do-i-get-rid-post5674049.html#post5674049

 

[BBHomestead]

Tractor time

Needed some fork extensions this morning. Perhaps more the economy model
View attachment 644348

Still, quite effective
View attachment 644349

And very functional for placing my roof structure
View attachment 644350
View attachment 644351

No metal yet, tomorrow is another day
View attachment 644352
View attachment 644353

Whatever works sometimes right!
I have some leftover rectangle tubing that is like 6 ft long and fits over my forks i use occasionally i need to drill and tap them so they dont slide off nutnever seem to do it when im not busy lol

 

[Diggin It]

I'll turn over 200 hours in the next few days, at 196.4 now. Picked it up in September of '18, so a year and a half or so.

 

[Diggin It]

What does a 26 x 12.0 – 12 R4 tire mounted to the wheel and filled with Rimguard weigh?

 

[lostcreekranch]

What does a 26 x 12.0 – 12 R4 tire mounted to the wheel and filled with Rimguard weigh?

https://www.rimguardsolutions.com/wp-content/uploads/2018/03/RimGuardBeetJuiceTireFillChart.pdf

What is this tire on?

 

[lostcreekranch]

Building more burn piles.