what happened to glennmac??

   / what happened to glennmac?? #1  

jimmoore

Platinum Member
Joined
Jul 21, 2000
Messages
565
Location
Augusta, AR
Tractor
05 CASE IH D35 W/FEL
what happened to glennmac? he hasn't had a new post since back about September of last year. Anyone know?

6-27459-jimsford.gif
jim
 
   / what happened to glennmac?? #2  
Is that the guy who got his new B2910 stuck while wearing a suit and tie? I still wonder what ever happened to Mark C. as well? He was all over this board and now is gone. I hope nothing bad has happened. Has anyone had any contact with him?

18-30445-von.gif
 
   / what happened to glennmac?? #3  
<font color=blue>I hope nothing bad has happened.</font color=blue>

For my own peace of mind I like to assume that their lives have become so rich and full that there just isn't room for TBN right now. /w3tcompact/icons/smile.gif

Of course, we all know that TBN gets into your blood, and it's just a matter of time before they'll be back online. /w3tcompact/icons/wink.gif

HarvSig.gif
 
   / what happened to glennmac?? #4  
GLENNMAC?
Last known, Glenn was re-evaluating his presence on the board, due to the personal (vicious and uncalled for in my opinion) verbal attack he recieved from someone on the board who did not like his viewpoint. Understandably, he was quite upset about it.
MARK C? Haven't a clue, but has anyone sent him an email?
 
   / what happened to glennmac?? #5  
Ok Scruffy let me ask this---it wasn't something I said was it?

Lets look back a year ago at how many posts there was during a day compared to now. Wow has this board grown. I still try to keep up on the messages but so many new names.

I got an e-mail from Mark in early March, he is busy doing a couple of computer projects and doing well at that time.

So let us remember our roots.
Gordon
 
   / what happened to glennmac?? #6  
Gordon, Not that I know of!! Whomever did the deed, was not man/woman enough to identify themselves. Muhammad killed the post, but not soon enough so that GlennMac didn't see it. Disagreement is fine, but there are gentlemanly ways to do so without creating the hurt generated in that instance.
 
   / what happened to glennmac?? #7  
It was more than the offending post that was killed, the entire thread was removed. As I recall the thread was on safety and GlennMac had a less popular viewpoint. I had also posted in the thread with a less popular viewpoint. If I remember correctly it was more than just one person that did not want to hear the differing opinions, after all it was about safety and how could anybody question that. There was some good opinions on both sides expressed in a civil manor, it was to bad the entire thread was pulled instead of just the personal attack type post(s).

I know that have I reduced my participation here, ever since, as a result of that thread.

Andy
 
   / what happened to glennmac?? #8  
I don't think you should punt with just that incident, this board is just about free of the nonsense that most internet talk groups have to put up with. As long as we try to stick to generally tractors we are OK, when we start things like Bush is a Boob, Gore is a Goof etc there might be some problems! But I've seen some really intelligent discussions on politics, gun control etc also on some boards, of course there's always someone that goes off on most boards.

I have been reading this and don't even remember the particular thread. If it was pulled, I must have missed it somehow, maybe one of those times I was out stuck in the bog, trying to figure out why I wasn't heading my own advice to hook a short chain to the bottom of the tractor BEFORE you go into the goo! /w3tcompact/icons/smile.gif

so andy, welcome back, even if it was just for this one post.

del
 
   / what happened to glennmac?? #9  
Andy,

I'm not sure which thread you are referring-to, ...or when Glenn last posted.

I was wondering if the thread in question might have been the following, which generated some strong response: "Hunters Beware" / Oct. 2000 - Rural Living forum.

http://www.tractorbynet.com/cgi-bin...rural&Number=18347&page=4&view=collapsed&sb=5

If it was some other thread, and as you say, the topic was "safety" related, then I would strongly oppose the elimination of an entire thread, rather than just the offensive post.

[[[I know that have I reduced my participation here, ever since, as a result of that thread.]]] I'm sorry to hear that "excess" on the part of one, can drive away participants. Any "kitchen" can have its high-temperature moments, but in general, and particularly on TBN, is still a "homey" place of camaraderie and good will.

If I am correct, Glenn is a lawyer. Surely philisophical differences and "argument" are not unfamiliar elements to him. Hopefully his recent absence is not simply a response to strongly-worded differing opinion. /w3tcompact/icons/shocked.gif

In any case, differences in the thread to which I refer were expressed with civility, for the most part. I think TBN is an example of how well-intended members can share a variety of "views" without destroying the underlying base of friendliness and mutual respect. Exceptions may occur, but shouldn't be permitted to change the "course" of the membership-at-large.

Sincerely, /w3tcompact/icons/smile.gif

Larry
 
   / what happened to glennmac??
  • Thread Starter
#10  
I sure hate to see anyone quit TBN just because they got jumped on a little hard. I did a post that wasn't in good taste once and someone got on my case pretty hard. But after 20 years in my line of work, I am pretty thick skinned. I had Mohammad remove my post because it probally offended the person who jumped me so hard. Keep a stiff upper lip you all and COME ON BACK!!

6-27459-jimsford.gif
jim
 

Tractor & Equipment Auctions

David Bradley Manure Spreader (A50515)
David Bradley...
CATERPILLAR 325FL EXCAVATOR (A51242)
CATERPILLAR 325FL...
2009 KUBOTA M7040 TRACTOR (A51406)
2009 KUBOTA M7040...
2015 JLGI Trailer (A50324)
2015 JLGI Trailer...
2017 Dodge Charger Sedan (A50324)
2017 Dodge Charger...
2018 INTERNATIONAL LT625 TANDEM AXLE DAY CAB (A51219)
2018 INTERNATIONAL...
 
Top