Redlands Okie
Veteran Member
No idea on the size of roofing rubber you ordered but hopefully its large enough to go down the sides a bit past the wood beams.
What we will do for wine
- Thread starter 65fl
- Start date
- Views: 3630
I thought I would wrap this project up. I finished last weekend right before it snowed. I even planted the bulbs and various succulents my wife had dug up. It was a job she wanted to do but blew her knee out (replacement surgery scheduled for Feb 2019), so she sat on the deck with a glass of wine and told me to plant what and where. It shouldn't have taken me so long to finish this project but we took 3 separate vacations this summer.
I overlapped the EPDM below the wood structure by about a foot
Building out the roof structure.
I wrapped the inside of the roof structure with leftover EPDM, the front was wrapped in tar paper. The top is a hunk of redwood I recycled when I repaired my deck a few years ago.
Almost done putting the dirt back on, my back is sore. I originally wanted cedar shingles but they were a stupid price so I just went with metal.
The flamingos are back where they belong, all is right with the world.
I overlapped the EPDM below the wood structure by about a foot
Building out the roof structure.
I wrapped the inside of the roof structure with leftover EPDM, the front was wrapped in tar paper. The top is a hunk of redwood I recycled when I repaired my deck a few years ago.
Almost done putting the dirt back on, my back is sore. I originally wanted cedar shingles but they were a stupid price so I just went with metal.
The flamingos are back where they belong, all is right with the world.
oosik
Epic Contributor
Herlig - you finished that project up very nicely. Once the grass reestablishes itself - lawn chairs - and fine homemade wine.
BTW - that very bottom picture - - be certain you close the door. Local wildlife might enjoy the new digs also.
BTW - that very bottom picture - - be certain you close the door. Local wildlife might enjoy the new digs also.
jmc
Elite Member
- Joined
- Jul 21, 2003
- Messages
- 3,115
- Location
- SW Indiana
- Tractor
- Ford 1920 4x4 (traded in on Kubota). Case 480F TLB w/4 in 1 bucket, 4x4. Gehl CTL60 tracked loader, Kubota L4330 GST
Nice!
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 6,842
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
Very nice!
Gary Fowler
Super Star Member
- Joined
- Jun 23, 2008
- Messages
- 11,911
- Location
- Bismarck Arkansas
- Tractor
- 2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010
Very nice job. I sure couldn't have even done the dirt removal by hand. You are very lucky to have a good back for those type of projects. Your great grandchildren should be able to use that wine cellar.
EddieWalker
Epic Contributor
Love the creativity of this project. Definitely thinking outside the box. How did you finish off the inside? Shelving?
